Sanyo XG-705A owner manual One-byte characters. The name set here will be displayed on

Page 45

	6. Configurations with Browser

Parameter	Description
Projector	Name each projector to distinguish it from other projectors (up to 32
	one-byte characters). The name set here will be displayed on the
	Network Projector List in the application operation screen.
IP Configured Method	A desired IP address setup method is selected from “Manual”,
	“DHCP”, and “BOOTP”.
	If “DHCP” or “BOOTP” is selected, the IP address is obtained
	automatically as “DHCP client” or “BOOTP client”. At this time, it is
	necessary that the DHCP server/BOOTP server must be in the
	environment allowing the network communication.
	IP Address, Subnet Mask, and Gateway Address fields will be displayed
	“-.-.-.-”,when the IP Address Configuration Method is set to DHCP or
	BOOTP and failed to get the figures from the DHCP server, the
	computer cannot be connected to the projector.
	If the projector fails to obtain IP address from BOOTP server, the
	existing IP address will be assigned.
IP Address	Set the IP address in the environment you wish to use.
	If “IP Configuration Method” is set to “DHCP” or “BOOTP”, this
	setting is not needed.
Subnet Mask	Set the Subnet mask in the environment you wish to use.
	If “IP Configuration Method” is set to “DHCP” or “BOOTP”, this
	setting may become unnecessary depending on the settings of “DHCP
	Server” and “BOOTP Server”.
Gateway Address	Set the gateway address in the environment you wish to use.
	If “IP Configuration Method” is set at “DHCP” or “BOOTP”, this
	setting may become unnecessary depending on the settings of “DHCP
	Server” and “BOOTP Server”.
	If any segment beyond the router is not used, the gateway address can
	be remained "255.255.255.255".
Wireless Mode*	Select the Communication mode 802.11b or 802.11b.g.
Network Type*	Select either “Infrastructure” or “AdHoc”.
SSID*	Set the SSID/ESSID (up to ASCII 32 characters).
	SSID/ESSID is case-sensitive. Even though all characters projected in
	Wired/Wireless information are uppercase, it is necessary to distinguish
	between upper case and lower case characters.
APPLY button	Click the APPLY button to update. The screen to restart the projector will be
	displayed.
REFRESH button	Update and show the adjusted data.
RESTORE Factory Default
Settings button	Restore the settings to the values at the factory.

* Not displayed at Wired LAN setting.

45

Image 45

Contents Network Set-up Operation Federal Communication Commission Notice ComplianceTrademarks and Copyright Safety InstructionsTable of Contents Restart Advanced SetupModerator Function TerminologyRequired Operating Environment for Computers Operating Environment and ConfigurationDiffers according to the operating environment Network Specifications of the ProjectorPage About LAN Functions ChapterAbout LAN Functions LAN Functions and the FeaturesImage Projecting System via LAN Flow of Image TransferAn Example of the Connection LAN Connection Modes Operate the computer mouse with the remote control Page Setup Procedures Setup Procedures Install the software on computersNetwork Configuration has completed Installing the Software Setup Procedures Names and Functions of the Operation Screen Network Connection Standby Display Names and Functions of the Operation ScreenParts Names and Functions of the Screen NetworkModule ClientAdvanced Settings NetworkModule Moderator Page Wired LAN Configurations Connecting to the LAN Line Wired LAN ConfigurationsNetwork Environment Settings Setting ProcedureWired LAN Configurations Confirming the Operation Wired LAN Configurations User PIN Code Wired Factory Default See the menu aboveDNS Domain System Blank Password User PIN Code Factory Default Setting of the Wired LANPage Wireless LAN Configurations Attaching the USB Wireless LAN Adapter Wireless LAN ConfigurationsSetting the Network Environment Setting ProceduresWireless LAN Configurations Easy Setting Wireless Information Wireless Factory DefaultComputer environment and Wireless LAN connection Leap User Blank Password Wireless LAN Factory Default SettingsOperation of Network Viewer Configurations with BrowserBrowser Configuration Configurations with BrowserIntroduction Browser EnvironmentStarting up the Browser Information Screen of Wireless LAN Screen of Wired LANParameters and descriptions of Information Quick Setup One-byte characters. The name set here will be displayed on TCP / IP Password Wireless SettingReaches in ***hours up to ASCII220 characters MailHave entered is displayed as up to ASCII32 characters Admin PasswordUser PIN code Figure will be displayed as . The password consists Moderator Login PasswordMiscellaneous Wireless LAN set menu Wired LAN set menu Change Configuration SetRestart Project the Image via the Networks Project the Image via the Networks Use the Moderator Function Moderator Function Use the Moderator FunctionPreparation Procedure for Using the Moderator Function Preparation for Using the Moderator FunctionRegistration of the Moderator Setting the Moderator FunctionRegistration of the Clients Participants Unregister from Moderator Status How to Use the Moderator FunctionProject the Client’s Images Stop Projecting the Client’s ImagesHow to Use Network Viewer Mechanism of NetworkViewer and the Flow of the Signal How to Use Network ViewerWireless LAN Infrastructure Communication Mode Wireless LAN AdHoc Communication ModeWired LAN Communication Mode OperationFunctional Conditions of FTP Server Which Provides Images Operating with the PJ Controller Projecting the ImageSpecify the FTP server to provide image data Operating with the Browser Refresh Operating with the projector Wireless LANSet timing to switch images in Auto play mode 3-240 sec Page How to Use the PJ Controller How to Operate How to Use the PJ ControllerInitial Settings Registering E-mail Address Mail SettingEnter the message to attach the E-mail Check Option itemsTurning on/off the projector Power & StatusCheck the status of the projector Input ControlPC adjustment System Adjustment Image Adjustment Screen Setting Select On to automatically set the PC adjustment Confirm the actual adjustment ServiceSelect Set Number and name the setting Save the setting SetLoading the Set Multi Control Select projector input Appendix Wireless LAN Connection cannot be established TroubleshootingAppendix Computer cannot connect projectorsWEP Projector/PJ Controller cannot be turned on/off Cannot start up the browserNetwork Viewer does not work with the projector operation Speed of playing back images are very slowTerminology Setting up the IP address with arp + pingcommand Configuring WEP security with the projector Appendix KW6AC