Sanyo PLC-HP7000L Computer Input, Computer System Selection, Automatic Multi-Scan System

Page 35

Computer Input

Computer System Selection

Automatic Multi-Scan System

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 88-89)

One of the following messages may appear when:

	When the projector cannot recognize the
Auto	When the projector cannot recognize the
	connected signal conforming to the provided
	PC Systems, Auto is displayed on the System
	Menu box and the Auto PC adjustment function
	works to display proper images. If the image is
	not projected properly, a manual adjustment is
	required (pp. 37-38).

-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on pp. 78-80.)

	The preset system is manually adjusted in the
Mode 1	The preset system is manually adjusted in the
	PC adjust Menu. The adjusted data can be
	PC adjust Menu. The adjusted data can be
	stored in Mode 1-10(pp.37-38).
	PC Systems provided in this projector is
SVGA 1	PC Systems provided in this projector is
	chosen. The projector chooses a proper system
	provided in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

PC System Menu

The PC System Menu Selected system is displayed.

Selecting Computer System Manually

PC system can also be selected manually.

1Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point ► or the SELECT button.

2Use the Point ▲▼ buttons to select System and then press the Point ► or the SELECT button.

3Use the Point ▲▼ buttons to select the desired system and then press the SELECT button.

PC System Menu

Customized Mode (1-10)set in the PC adjust Menu (pp.37-38).

Systems in this dialog box can be selected.

35

Image 35

Contents Network Set-up and Operation  Projection lens is optionalFeatures and Design Table of Contents Please, help us to conserve the environ- ment we live Safety PrecautionTo The Owner For EU UsersMounting kit approved by the manufacturers Safety InstructionsTop Panel Safety Instructions Air CirculationAir flow Air Intake Vent Cautious use of equipment with laser technology Positioning PrecautionsNever allow children to touch the lens Safety Instructions Moving the ProjectorCompliance AC Power Cord RequirementAC Power Cord for the United States and Canada AC Power Cord for the United KingdomFront ① Part Names and FunctionsPart Names and Functions Rear Terminal Side Control Indicators on the top panel Part Names and Functions Side Control and IndicatorsPart Names and Functions Remote Control Part Names and Functions 16.4’ 5 m Remote Control Receivers and Operating RangeWired Remote Control Transmitter ON/OFF Part Names and Functions Remote Control CodeAdjustable Feet Removing the lens InstallationLens Installation Attaching the lens to the projector InstallationLNS-W34 Focus adjustmentBe Sure to Check for Safety Focus correctionDigital MonitorOutput SerialMonitor Out Signal Table For Continental Europe Installation Connecting the AC Power CordProjector side AC Outlet side Enter a PIN code Basic OperationTurning On the Projector Turning Off the Projector What is PIN code?Power off? disappears after 4 seconds Basic OperationOn-Screen Menu Basic Operation How to Operate the On-Screen MenuRemote Control Side ControlBasic Operation Main Menu Lens Operation Zoom AdjustmentLens Shift Adjustment Basic Operation Operating with Projector ControlInformation Menu Basic Operation Operating with Remote ControlMouse Pointer button Timer buttonUser 1 of PIP example User 2 of PIP examplePoint Basic Operation Keystone CorrectionStandard Corner correctionArrow Finger Wireless Mouse OperationBasic Operation Pointer Function Mouse Pointer buttonSide Control Side Control/Remote Control OperationRemote Control Operation Direct OperationRgbpc analog When Selecting Input 2 5 BNC Input JacksInput Selection Computer Input Source Selection Menu OperationRgbav Hdcp When Selecting Input 1 Computer Input TerminalsWhen Selecting Input 3 AV Terminals Input Selection Video Input Source SelectionSelecting Computer System Manually Computer InputComputer System Selection Automatic Multi-Scan SystemDirect Operation Computer Input Auto PC AdjustmentTo store the adjusted parameters PC adjust MenuPosition H Computer Input Manual PC AdjustmentAdjust and then press the Point or the Select Current modeStore Mode freeComputer Input Image select Menu Computer Input Image Level SelectionColor M Computer Input Image AdjustmentImage adjust Menu ListALL DEL MenuColor Palette DELAdvanced color Offset Red/Green/BlueAuto picture control Off Auto picture control OFF positionComputer Input Screen Size Adjustment Digital zoom + Reset............... Reset all the adjusted values. PressCustom adj Custom adjKeystone Ceiling Rear Pb/Cb, Pr/Cr Jacks Video InputVideo System Selection Video Jack or S-video JackNatural Natural picture level preset on the projectorPicture level adjusted with fine tone Video Input Image Level SelectionTint Video Input Image AdjustmentUse the Point buttons to adjust the setting value ColorVideo Input Use the Point buttons to select the advanced color ModeProgressive Noise reduction mode is OnNoise reduction OffNatural Wide Video Input Screen Size Adjustment……………When set to On, the aspect ratio is Keystone Ceiling Setting Menu Language Position SettingSetting Logo select Logo PIN code lock Capture Logo PIN code lockCapture Enter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code lock setting Enter a Logo PIN codePosition Menu Picture in PictureEdge blending To store the adjusted dataFrame lock Set the Frame Lock to Main picture or Sub pictureAdvanced Color matching...... Select Advanced color matching Color matchingAdvanced color matching Cancels the Advanced colorHdmi setup Measured information Advanced color matching Test patternFan control Filter controlLamp control Filter controlTo change the code for the projector To change the code for the remote controlSimple mode buttons Timer left before Lamp is off Power managementShut down ...... When the lamp has been fully cooled Timer............... If the input signal is interrupted18000 TimerStop or Cancel the P-timer via Remote Control Pointer…Unlocked Key lockPIN code lock Security Key lock and PIN code lockEnter a PIN code Change the PIN code lock settingPIN code change Release key ShutterShutter ProtectionClosed caption Video delay controlClosed caption Accumulated time of the lamp Usage Be sure to reset the Lamp replacement counter afterLamp counter Lamp counter . . . . . . . . . This item shows the totalTest pattern Factory defaultFilter counter Filter counterPlease wait.... . message Maintenance and CareReset the Filter counter p.73 and the Scroll counter p.73 Filter InstructionsModel No.. of your projector PLC-HP7000L Maintenance and Care Replacing the Filter CartridgeOrder Replacement Filter Cartridge RecommendationScroll counter Scroll counter Reset? appears Maintenance and Care Resetting the Filter CounterResetting the Scroll Counter Filter counter Filter counter Reset? appearsFollow these steps to replace the lamp Maintenance and Care Lamp ReplacementLamp replacement icon Lamp Replace indicatorPLC-HP7000L Maintenance and CareLamp Handling Precautions Order Replacement LampUnplug the AC power cord before cleaning Maintenance and Care Cleaning the Projection LensCleaning the Projector Cabinet Then check the matters below Is the filter clean? Replace the filter with a new oneAppendix TroubleshootingProblem Solutions Appendix Does not work Wireless mouseIndicators blink or You cannot operateComputer Input Appendix Menu TreeComputer Input/HDMI Input/Video Input Screen Hdmi Input/Video InputVideo Input Top/Bottom Start Left/Right Width Top/Bottom Width Languages provided Position Menu Normal/DoubleOff/On Logo PIN code lock Picture in Picture Left/Right Start Edge blending480 Min Direct on Pointer Timer Security Shutter Closed captionTimer Yes/No Filter Release keyProjector is operating normally Appendix Indicators and Projector ConditionLamp Replace Projector is detecting abnormal conditionProjector Condition Indicators72.004 Appendix Compatible Computer SpecificationsResolution Mechanical Information Appendix Technical SpecificationsPJ Link Notice Lens ReplacementTo the sales and service Appendix Optional PartsLAN Terminal Appendix Configurations of TerminalsDigital DVI-D DVI 24 PIN Appendix PIN Code Number Memo Appendix Dimensions Note Appendix List of Picture in PictureSerial Control Interface OperationFormat Functional Execution CommandStatus Read Command KY2AL