Sanyo PLC-HP7000L owner manual Appendix Menu Tree, Computer Input/HDMI Input/Video Input

Appendix

Menu Tree

Computer Input/HDMI Input/Video Input

Input

Input
	Input 1

Input 2

Input 3

Network *

RGB (PC analog) RGB (Scart)

RGB (PC digital)

RGB (AV HDCP) HDMI

Video

Y, Pb/Cb,Pr/Cr

RGB

Video

Y, Pb/Cb,Pr/Cr S-video

Information
Information
	Input
	System
	H-sync freq.
	V-sync freq.
	Screen
	Language
	Lamp status
	Lamp counter
	Filter counter
	Power management
	Key lock
	PIN code lock
	Shutter management	(Min)
	Simple mode
		Protection
	Remote control
		Release key
	SERIAL NO.

*Network will be displayed only when an optional PJ-Net Organizer is attached.

Computer Input

SVGA1	System (1)	Mode 1
		Mode 10
		SVGA 1
		SVGA 2
		SVGA 3

Image select
	Image select
		Dynamic
		Standard
		Real
		Image 1
		Image	10

 System displayed in the System Menu varies					PC adjust
depending on the input signal.
						PC adjust	Auto PC adj.
Image adjust
							Fine sync.		0–31
							Total dots
							Position H
Image adjust	Contrast		0–63
	Brightness		0–63				Position V
							Current mode
	Color mangement
							Clamp
	Color temp.		XLow
							Display	area - H
			Low
							Display area - V
			Mid
							Reset		Yes/No
			High
							Mode free
			Adj
							Store		Mode 1
	Red		0–63
	Green		0–63						Mode 10
			0–63
	Blue
			Red/Green/Blue
	Offset
	Auto picture control			Off/L1/L2
				Auto/Off
	Advanced color
			0–31
	Sharpness
	Gamma		0–15
			Yes/No
	Reset
			Image 1
	Store			Note:
		Image 10
				The Menu display varies depending on the input signal.

81