Sanyo PLC-HP7000L owner manual Logo select

Setting

Display

This function decides whether to display On-Screen Displays.

On	Show all the On-Screen displays. Use
	this function when you want to project
	images after the lamp becomes bright
	enough. The factory default setting is
	in this option.
Countdown ....Off Show the input image instead of
	the countdown when turning on the
	projector. Use this function when you
	want to project the image as early as
	possible even when the lamp is not
Off	bright enough.
	Hide the On-Screen Displays except:
	● On-Screen Menu
	● Power off? (p.24)
	● No signal for Power management.

(p.62)

● Please wait .... .

● White Arrows for panning mode (p.44)

● P-timer

● Simple mode

● Video delay control ● Picture in Picture ● Corner pattern

Background

Select the background screen for when no input signal is detected. Press the Point ▲▼ buttons to switch among each option.

Blue……Project a blue background.

User……Project an image captured in the Logo setting.

It is invalid when there is no image. Black……Project a black background.

Logo (Logo and Logo PIN code lock settings)

This function allows you to customize the screen logo with Logo select, capture, Logo PIN code lock and Logo PIN code change functions.

Note:

When On is selected in the Logo PIN code lock function, Logo select, Capture and Logo PIN code change cannot be selected.

Logo select

This function decides on the starting-up display from among following options.

Off ......... Show the countdown display only.

User....... Show the image you capture.

Default .. Show the factory-set logo.

Logo select

54