Computer Input
Screen Size Adjustment
Select the desired screen size that conforms to the input signal source.
1Press the MENU button to display the
2Use the Point ▲▼ buttons select the desired item and then press the SELECT button.
Normal
Provide the image within a screen size keeping its original aspect ratio.
Full
Provide the image to fit full screen size.
Wide (16:9)
Provide the image at the 16:9 wide screen ratio.
Zoom
Scale the image proportionally to fit the entire screen. Either side of image may go over the screen.
True
Provide the image in its original size. When the original image size is larger than the screen size (1920 x 1080), the projector goes to the panning mode automatically.
Use the Point ▲▼◄► buttons to pan the image. When adjusted, the arrows will turn red. When reaching to the correction limits, the arrows will disappear.
Custom
Provide the last stored aspect screen image.
SCREEN MENU
Note:
•The projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution is higher than 1920 x 1200, lower the resolution before connecting the projector.
•The image data other than 1920 x
1080 is modified to fit the screen size in initial mode.
•Full, Zoom, True, Custom adj. and
Digital zoom +/– cannot be selected when no signal is detected in the PC System Menu. (p.35)
43