Setting
Lamp control
Lamp control
This function allows you to change brightness of the screen.
Auto . . . . Brightness according to the input signal. Normal . . Normal brightness.
Eco 1 . . . Lower brightness and decrease of fan speed. Lower brightness reduces the lamp power consumption and extends the lamp life.
Eco 2 . . . Lower brightness and increase of fan speed. Lower brightness reduces the lamp power consumption and extends the lamp life. It is recommended to use Eco 2 when using the projector continuously over a long period of time. The fan noise becomes louder in Eco
2 than in Eco 1. Select the suitable mode for the operating environment.
Note:
The fan noise becomes louder in Eco 2 than in Eco 1. Select the suitable mode for the operating environment.
Filter control
You can replace the filter with this function. Press the SELECT button at Filter control to display a confirmation box. To replace, press the SELECT button at Yes and the electrically operated filter starts to scroll.
Note:
•Filter replacement icon and Please wait... message appear on the screen when the filter is being scrolled.
•The filter cannot be rewound.
•When the filter is replaced, the total accumulated time of the filter use is automatically set to 0.
•Scrolling will be carried out even if the FILTER button on the remote control is pressed.
Fan control
Choose the running speed of cooling fans from the following options.
Normal .. Operate in this mode under normal conditions.
Max........ Use this mode when you want to increase the
cooling effect when operating the projector in high ambient temperature environment. Fan noise is louder than Normal.
Filter control
A confirmation box appears and then select Yes.
61