Setting Menu Language Position | Sanyo PLC-HP7000L specs

Setting

This projector has a Setting menu that allows you to set up the other various functions described below.

1Press the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to select Setting and press the Point ► or the SELECT button to access the submenu items.

2Use the Point ▲▼ buttons to select the desired item and then press the Point ► or the SELECT button to access the selected item.

3Use the Point ▲▼ buttons to select the desired item and then press the SELECT button.

Language

The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean and Japanese.

Position

This function is used to adjust the On-Screen Menu display position. Press the SELECT button and the adjustment screen appears (arrows appear). Use the Point ▲▼◄► buttons to adjust the position. After making the adjustment, press the SELECT button to return to the Menu screen.

Menu size

This function is used to change the display size of the On-Screen Menu. Select Menu size and press the SELECT button.

Normal…Display the On-Screen Menu on the screen in its normal size.

Double…Display the On-Screen Menu on the screen in its double normal size. The on-screen menu is temporarily cleared while Color Management adjustment is in progress.

Input button

This function detects the input signal automatically. When a signal is found, the search will stop. Use the Point ▲▼ buttons to select one of the following options.

Mode 1...... Input search will not work.

Mode 2...... Input search works under the following

situation:

–When pressing the INPUT button on the side control or the remote control.

Mode 3...... Input search works under the following

situation:

–When turning on the projector by pressing the ON/STAND-BY button on the side control or pressing the ON button on the remote control.

–When pressing the INPUT button on the remote control or on the side control.

–When no signal is detected.

Setting Menu

Language

Position

Note:

•When the 4:3 function is selected in Screen aspect, Double is not available; it will be forced to return to Normal in Menu size.

Note:

•While Input button is set to Mode 3, and no signal is detected, if the Shutter or Freeze function is active, cancel it to activate the Input search.

•Only the last selected input source can be detected.

•If the INPUT, INPUT 1, INPUT 2, INPUT 3, ON / STAND-BY or MENU button is pressed during Input search is in progress, Input search will stop and go back to the previous input signal.