Sanyo PLC-HP7000L Offset Red/Green/Blue, Auto picture control, Advanced color, Sharpness, Gamma

Computer Input

Offset (Red/Green/Blue)

Press the Point ◄ button to lighten red/green/blue tone of the black level of an image; press the Point ► button to deepen red/green/blue tone of the black level of an image.

Auto picture control

Use the Point ◄► buttons to select the desired Auto picture control option (Off, L1 or L2).

Off	Auto picture control OFF position.
L1	Auto picture control LEVEL 1 position.
L2	Auto picture control LEVEL 2 position.

Advanced color*

Use the Point ◄► buttons to select the advanced color

mode.
Off	Advanced color mode is Off.
Auto	Advanced color according to the type of
	image.

Sharpness

Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 31).

Gamma

Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).

Reset

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures.

Store

To store the adjusted data, select Store and press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 10 and press the SELECT button.

A confirmation box appears and then select Yes. Stored data can be called up by selecting an Image (1-10)in the Image Level Selection on page 39.

*This function controls the operation of the Color Control Devic, which independently and automatically regulates the amount of yellow light passing through the LCD panel, to accurately reproduce both image color and image brightness. Normally leave Auto (default setting).

Note:

•White balance may change depending on the image.

Store

A confirmation box appears and then select Yes.

42