Setting
Filter counter
This function is used to set a frequency for the filter replacement.
Use the Point ▲▼ buttons to select Filter counter and then press the Point ► or the SELECT button to access the submenu items.
Filter counter……Show the total accumulated time of
the filter use timer setting.
Timer……………To set a timer, when the projector
reaches the time, the Filter replacement icon (Fig.1) appears on the screen and the total accumulated time turns red, indicating that the filter replacement is necessary. If the filter is out of scroll and the projector reaches a time set in the timer setting, Fig.2 appears on the screen, indicating that the filter cartridge replacement is necessary.
Filter counter reset…When replacing the Filter cartridge, reset the Filter counter and the Scroll remaining (p.73).
Scrolls remaining…When the filter scroll is counted down to 1, Scroll remaining on the screen is showing 0 scroll(s) , the last scroll icon (Fig.3) appears on the screen. When the filter scroll is counted down to 0, the Filter cartridge replacement icon (Fig.4) appears on the screen and the WARNING FILTER indicator lights orange, indicating that the filter cartridge replacement is necessary.
ScrollcounterReset…When replacing the Filter cartridge, reset the Filter counter and the Scroll remaining (p.73).
Note:
•Do not reset the counter when the filter or the filter cartridge is not replaced.
•Timer setting notifies that the filter needs replacement. To replace the filter, use the filter control function (p.61).
Test pattern
Various test pattern are available for use when setting up the projector: Color,
Factory default
This function returns all setting values except for User logo, PIN code lock, Logo PIN code lock and Filter counter to the factory default settings.
Filter counter
Press the SELECT button to select Timer and then use the Point ▲▼ buttons to set the timer. Select from (Off/ 400H/700H/1000H) depending on the operating environment.
Note:
When the set time of Filter counter is not reached, Timer cannot be selected; while when the maximum time value 1000H is surpassed, 1000H can be selected again.
Fig..1 Filter replacement icon
Filter replacement icon appears on the screen at a set time.
Fig..2
Fig..3 Last scroll icon
Last scroll icon appears on the screen when the filter is down to the last scroll.
Fig..4 Filter cartridge replacement icon
Filter cartridge replacement icon appears on the screen when the filter scroll is counted down to 0 scroll.
Note:
•Fig.1, Fig. 2, Fig. 3 and Fig. 4 appear at turning on and selecting input source.
•Fig.1, Fig. 2, Fig. 3 and Fig. 4 will not appear when the Display function is set to Off (p.54) or during “Freeze” (p.29).
70