Sanyo PLC-HP7000L owner manual Part Names and Functions Side Control and Indicators

Part Names and Functions

Side Control and Indicators

Side Control Indicators (on the top panel)

①

②⑦

③⑥

④

⑤

①ON/STAND-BY button

Turn the projector on or off (pp.23–24).

②INPUT button

Select an input source (pp.32–34).

③MENU button

Open or close the On-Screen Menu (p.25).

④Point ▲▼◄► buttons

–Select an item or adjust the value in the On-Screen Menu (p.25).

–Pan the image in Digital zoom + mode (p.44).

⑤SHUTTER button

Close and open up the built-in shutter. (p.27)

⑥SELECT button

–Execute the selected item (p.25).

–Expand or compress the image in the Digital zoom mode (p.44).

⑦LENS button

Enter the focus, zoom, and lens shift adjustment mode (p.27).

⑧

⑨

⑩

⑪

⑫

⑧POWER indicator

–Light when in stand-by mode and during operations.

–Blink in the Power management mode (p.63).

⑨LAMP/SHUTTER indicator Light red during operations.

Light blue when the shutter is closed (p.85).

⑩LAMP REPLACE indicator

Light orange when the projection lamp reaches its end of life (pp.74, 84).

⑪WARNING FILTER indicator

–Blink slow when the filter is being scrolled (pp. 71, 85).

–Blink fast when the filter scroll is not working properly or the filter cartridge is not installed (pp.71, 87).

–Light orange when the clogging of the filter is detected or the filter counter reaches a time set in the timer setting, urging immediate filter/ filter cartridge replacement (pp.70, 71, 87).

⑫WARNING TEMP.. indicator

Blink red when the internal temperature of the projector exceeds the operating range (pp.77, 85-87).

12