Sanyo PLC-HP7000L owner manual Projector is detecting abnormal condition, Lamp Replace

Appendix

The projector is detecting abnormal condition..

	Indicators				Projector Condition
POWER	LAMP/	LAMP	WARNING	WARNING
green	SHUTTER	REPLACE	FILTER	TEMP.
	red/blue	orange	orange	red
	❖				The temperature inside the projector is elevated
					close to the abnormally high level.
					The temperature inside the projector is
					abnormally high. The projector cannot be turned
					on. When the projector is cooled down enough
	❖				and the temperature returns to normal, the
					POWER indicator lights green and the projector
					can be turned on. (The WARNING TEMP.
					indicator keeps blinking.) Check and replace the
					filter.
					The projector has been cooled down enough and
	❖				the temperature returns to normal. When turning
					on the projector, the WARNING TEMP. indicator
					stops blinking. Check and replace the filter.
					The lamp cannot light up. (The projector is
	❖				preparing for stand-by or the projection lamp
					is being cooled down. The projector cannot be
					turned on until cooling is completed.)
					The lamp cannot light up. (The lamp has been
	❖				cooled down enough and the projector is in
					stand-by mode and ready to be turned on with
					the ON/STAND-BY button.)
					The lamp has been used overtime. Replace the
					lamp immediately.

WARNING FILTER

When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with a new one promptly. Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.73).

LAMP REPLACE

When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange. When this indicator lights orange, replace the projection lamp with a new one promptly (p.74).

86