Sanyo PLC-HP7000L Custom adj, Reset............... Reset all the adjusted values. Press

Computer Input

Custom adj..

Adjust the screen scale and position manually with this function.

Press the Point ► button or the SELECT button at Custom adj.. and Custom adj.. is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust.

Scale H/V ........ Adjust the Horizontal/Vertical screen

scale.

H&V ................. When set to On, the aspect ratio is fixed.

Scale V appears dim and becomes unavailable. Adjust Scale H, and then the screen scale is automatically modified based on the aspect ratio.

Position H/V ... Adjust the Horizontal/Vertical screen position.

Common ......... Save the adjusted scale to all the inputs.

Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at Yes. When Custom is selected, the saved scale is used.

Reset............... Reset all the adjusted values. Press

the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at Yes.

Digital zoom +

Select Digital zoom +. The On-Screen Menu disappears and D.. zoom + appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size.

You can also enter the Digital zoom + mode by pressing the D.ZOOM button on the remote control.

Digital zoom -

Select Digital zoom – . The On-Screen Menu disappears and D.. zoom – appears. Press the SELECT button to compress image size.

The projected image can be also compressed by pressing the D.ZOOM button on the remote control.

You can also enter the Digital zoom - mode by pressing the D.ZOOM button on the remote control.

To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 32-34) again or adjust the screen size with the D.ZOOM button.

Custom adj..

Note:

•When no signal is detected, Normal is set automatically and the Aspect dialog box disappears.

•The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.

Note:

•The panning function may not operate properly if the stored Mode in the PC adjust Menu is used (p.38).

•The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size.

•True and Digital zoom +/– cannot be selected when 480i, 575i, 480p or 575p is selected in the PC System Menu (p.35).

•Digital zoom +/- cannot be selected when True is selected.

•Digital zoom – cannot be operated when Custom is selected.

44