Hitachi CP-X608 user manual Using as a wired remote control, Using as a simple PC mouse & keyboard

Page 16
LASER INDICATOR

Remote control

Using as a wired remote control

The accessory remote control works as a wired remote control, when the wired control port at the bottom of the remote control connects with the REMOTE CONTROL port on the back of the projector via an audio cable with 3.5 diameter stereo mini plugs.

When the remote control signal is hard to reach surely to the projector in the environment, this function is effective.

 

 

REMOTE

 

AUDIO

CONTROL

L

OUT

(3.5Φ)

O IN 4

 

 

NOTE • To connect the remote control with the projector, use an audio cable with 3.5 diameter stereo mini plugs.

Using as a simple PC mouse & keyboard

The accessory remote control works as a simple mouse and keyboard of the PC, when an M1-D/USB cable connects this projector’s M1-D port with the PC’s DVI-D and USB (A type) ports.

(1) Mouse left button

Pushing the button into the center point works instead of clicking the mouse's left button.

Tilting this button to one of eight directions moves the PC's move pointer on the screen in the direction.

(2) Mouse right button

Pressing the button works instead of clicking the mouse’s right button.

(3) Lever switch

Sliding toward the side marked ▲ works instead of the

STANDBY/ON VIDEO

RGB

 

 

 

[↑] key on the keyboard. Sliding toward the side marked

BLANK

 

LASER

▼ works instead of the [↓] key on the keyboard.

 

 

 

(4) Cursor button ◄

ASPECT

 

 

This button works instead of the [←] key on the

ENTER

 

 

PAGE UP

 

PAGE DOWN

keyboard.

ESC

MENU

RESET

POSITION

AUTO

 

(5) Cursor button ►

MAGNIFY

MY BUTTON VOLUME

ON

1

 

 

 

MUTE

This button works instead of the [→] key on the keyboard.

OFF

2

 

FREEZE

KEYSTONE SEARCH

 

 

 

(6)PAGE UP button

This button works instead of the PAGE UP key on the key board.

(7)PAGE DOWN button

This button works instead of the PAGE DOWN key on the key board.

to a signal

source

 

BLANK

LASER

 

(1)

 

 

 

(3)

 

 

(2)

ASPECT

 

 

(4)

PUSH ENTER

 

(5)

(6)

PAGE UP

PAGE DOWN

(7)

 

ESC

MENU RESET

 

 

POSITION

AUTO

 

NOTE • When the simple mouse & keyboard function of this product does not work correctly, please check the following.

-When an M1-D/USB cable connects this projector with a PC having a built-in pointing device (e.g. track ball) like a notebook PC, open BIOS setup menu, then select the external mouse and disable the built-in pointing device, because the built-in pointing device may have priority to this function.

-Windows 95 OSR 2.1 or higher is required for this function. And also this function may not work depending on the PC’s configurations and mouse drivers.

-Operating simultaneously two or more keys is void except for mouse drag and drop operation.

-This function is activated only when the projector is working properly.

16

Image 16
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Content Contents of package Fastening the lens coverPart names ProjectorHOT!4 HOTControl panel Rear panelComponent 10 11 15 16Remote control Laser Indicator 14Back Remote control Laser pointer 14 It is a beam outletSetting up Arrangement On a horizontal surfaceSuspended from the ceiling DownAdjusting the projectors elevator Using the security bar and slotSecurity bar Anti-theft chain or wire Security slot FootSignal source Remote control Speakers Connecting your devicesVCR/DVD player Connecting your devices About Plug-and-Play capabilityInsert the Wireless Memory Network card Inserting an SD card and USB memoryUSB AUX I/O port SD card slot Angled cornerConnecting power supply How to use the slot cover lockAC inlet Connector of the power cord to the outlet Remote control Laser IndicatorLaser pointer Putting batteriesAbout the remote control signal Changing the frequency of remote control signalFront and top sensors Back sensorUsing as a wired remote control Using as a simple PC mouse & keyboardPower on/off Turning on the powerTurning off the power STANDBY/ON button Power indicatorAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSelecting an input signal Searching an input signalSelecting an aspect ratio Adjusting the zoom and focus Adjusting the lens shiftUsing the automatic adjustment feature  For a video signal or s-video signalCorrecting the keystone distortions Adjusting the positionUse the cursor buttons / to select Auto or Using the magnify feature Press the on button of Magnify on the remote controlFreezing the screen Magnify indication will appear on the screenTemporarily blanking the screen Using the menu function Easy MenuAdvanced Menu Enter buttonEasy Menu Easy Menu Picture Menu GammaUsing the / buttons switches the color temperature mode Picture MenuCustom and then pressing the button or Color TempActive Iris LOAD1, LOAD2, LOAD3, LOAD4MY Memory SAVE1, SAVE2, SAVE3, SAVE4Over Scan Image MenuPosition Phase Auto AdjustImage Menu SizeInput Menu Progressive3D-YCS Color SpaceComponent Input MenuM1-D Frame Lock RGBResolution Custom Resolution BOXSetup Menu Setup Menu Audio Menu Using the /// buttons adjusts the menu position Using the / buttons switches the mode for the blank screenScreen Menu Or keep no operation for about 10 secondsScreen Menu Start UPCapturing error has occurred. Please try again MyScreen registration is finishedNo Input is Detected Sync is OUT of RangeMessage Source NameOption Menu Turn on  Turn OFFAuto Search Auto onAuto OFF Option MenuLamp Time MY Button ServiceFAN Speed Filter Message GhostLens Type Factory Reset KEY LockRemote Receiv Remote FreqUsing Security Features Inputting the PasswordChanging the Password SecurityUsing the MyScreen Password Function Description If you have forgotten your PasswordTurning on the MyScreen Password Setting the PasswordUsing the PIN Lock Function Turning the Password offSecurity Registering the PIN CodeTurning Off the PIN Lock Function Description SecurityIf you have forgotten your PIN Code Setting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function Setting the Transition Detector off BOXLive Mode MIU MenuPC-LESS PresentationSetup MIU MenuDefault Gateway IP AddressSubnet Mask Time DifferenceNetwork Mode ModeEncryption SpeedRemove ALL, Remove SD CARD, Remove USB Maintenance Case of replacement by yourselfLamp Type number = DT00771 Replacing the lampLamp warning LampType number = MU03642 Cleaning the air filter Air filterAir filter Take the old battery out Internal clock batteryWill come up. Remove the battery Put a new battery Page Troubleshooting There is no input signalInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Electrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Signal source does not correctly workVolume is adjusted to an extremely low level Audio setting is not correctColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Either the focus and/or horizontal phase settings areWhisper function is working Lamp is approaching the end of its product LifetimeWarranty and after-service SpecificationSpecifications