Hitachi CP-X608 user manual Warranty and after-service, Specification

Warranty And After-Service / Specification

Warranty and after-service

If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied.

Specification

		Item				Specification
Product name				Liquid crystal projector
Liquid		Panel size		2.0 cm (0.79 type)
Crystal	Drive system			TFT active matrix
Panel
		Pixels		786,432 pixels (1024 horizontal x 768 vertical)
Lens				Zoom lens F=1.7 ~ 2.1 f=24 ~ 29 mm
Lamp				285W UHB
Speaker				4W x 4
Power supply				AC 100-120V/5.0A, AC220-240V/2.1A
Power consumption				460W
Temperature range				5 ~ 35°C (Operating)
				418 (W) x 139 (H) x 319 (D) mm
Size				(Not including protruding parts)
				* Please refer to the following figure.
Weight (mass)				7.1 kg
				RGB input port			Audio input port
				RGB1	D-sub 15pin mini x1		AUDIO IN1	Stereo mini x1
				RGB2	D-sub 15pin mini x1		AUDIO IN2	Stereo mini x1
				RGB output port			AUDIO IN3	RCA x2
				RGB OUT..D-sub 15pin mini x1			AUDIO IN4	RCA x2
				Digital input port			Communication port
Ports				M1-D		M1-D x1	CONTROL	D-sub 9pin x1
				Video input port			Other ports
				Y, CB/PB, CR/PR		RCA x3	LAN	RJ45 x1
				S-VIDEO		S-video x1	AUX I/O	USB(A) x1
				VIDEO		Video x1	SD card slot	x1
							REMOTE CONTROL
							..........................	Stereo mini x1
Optional			Lamp	DT00771
			Air filter	MU03642
parts
			Others	* Please consult your dealer.

NOTE • These specifications are subject to change without notice.

71