Hitachi CP-X608 Using the Transition Detector Function, Setting the Transition Detector Password

Page 52

OPTION Menu

OPTION Menu (continued)

Item

Description

4. Using the Transition Detector Function

While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below.

•Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed.

•Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.

•Keystone adjustment feature has been prohibited as long as the Transition Detector function is ON.

4.1 Turning On the Transition Detector Function

4.1-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition Detector and press the ► or the ENTER button to display the Transition Detector on/off menu. Select TURN ON and the current angle and mirror setting will be recorded.

•This feature may not function properly if the projector is not in a stable position when TURN ON is selected.

4.1-2 If this function is set to TURN ON when the vertical angle of the projector or mirror setting at which the projector is turned on is different than the previously recorded the Transition Detector Alarm will be displayed and the projector will not display the input signal.

64#05+6+10&'6'%614

674010

67401((

Transition Detector

on/off menu

64#05+6+10&'6'%61410

6JGRTQLGEVQTJCUDGGPVTCPUHGTTGF HTQORTGXKQWUN[2+0KPUVCNNGF$1: RQUKVKQP +H[QWYKUJUETGGPVQJCXGCICKPCUSWCTG KOCIG FKUCDNG6TCPUKVKQP&GVGEVQTQP/GPW

Transition Detector Alarm

SECURITY (continued)

Set the Transition Detector off I the SECURITY menu to display the input signal.

If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after the power switch was turned off.

4.2 Setting the Transition Detector PASSWORD

4.2-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition Detector and press the ► or the ENTER button to display the Transition Detector on/off menu.

4.2-2 Use the ▲/▼ buttons on the Transition

64# 5+6+10&'6'%614

 

Detector on/off menu to select TURN ON.

'06'42#55914&

 

The ENTER PASSWORD BOX (small) will be

 



 

displayed.

 

 

 

 

 

 

 

 

 

 

4.2-3 Use the ▲/▼/◄/► buttons to enter a

ENTER PASSWORD

PASSWORD. Move the cursor to the right side of

 

 

BOX (small)

the ENTER PASSWORD BOX (small) and press

 

 

 

 

 

the ► button to display the CHECK PASSWORD

 

 

 

 

 

 

 

 

 

 

BOX, enter the same PASSWORD again.

 

 

 

 

 

4.2-4 Move the cursor to the right side of the

37+6

0

 

CHECK PASSWORD

CHECK PASSWORD BOX and press the

 

 

BOX

 

 

► button to display the PASSWORD for

 

 

 

 

 

about 20 seconds, please make note of the

 

 

 

 

 

PASSWORD during this time.

 

 

 

':+6

 

Pressing the ENTER button on the remote control or

 

 

 

'06'4

 

 

the INPUT button on the projector will return to the

 

 

PASSWORD BOX

Transition Detector on/off menu.

 

 

 

 

 

• Please do not forget your Transition Detector PASSWORD.

(continued on next page)

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Content Contents of package Fastening the lens coverPart names ProjectorHOT!4 HOTControl panel Rear panelComponent 10 11 15 16Remote control Laser Indicator 14Back Remote control Laser pointer 14 It is a beam outletSetting up Arrangement On a horizontal surfaceSuspended from the ceiling DownAdjusting the projectors elevator Using the security bar and slotSecurity bar Anti-theft chain or wire Security slot FootSignal source Remote control Speakers Connecting your devicesVCR/DVD player Connecting your devices About Plug-and-Play capabilityInsert the Wireless Memory Network card Inserting an SD card and USB memoryUSB AUX I/O port SD card slot Angled cornerConnecting power supply How to use the slot cover lockAC inlet Connector of the power cord to the outlet Remote control Laser IndicatorLaser pointer Putting batteriesAbout the remote control signal Changing the frequency of remote control signalFront and top sensors Back sensorUsing as a wired remote control Using as a simple PC mouse & keyboardPower on/off Turning on the powerTurning off the power STANDBY/ON button Power indicatorAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSelecting an input signal Searching an input signalSelecting an aspect ratio Adjusting the zoom and focus Adjusting the lens shiftUsing the automatic adjustment feature  For a video signal or s-video signalCorrecting the keystone distortions Adjusting the positionUse the cursor buttons / to select Auto or Using the magnify feature Press the on button of Magnify on the remote controlFreezing the screen Magnify indication will appear on the screenTemporarily blanking the screen Using the menu function Easy MenuAdvanced Menu Enter buttonEasy Menu Easy Menu Picture Menu GammaUsing the / buttons switches the color temperature mode Picture MenuCustom and then pressing the button or Color TempActive Iris LOAD1, LOAD2, LOAD3, LOAD4MY Memory SAVE1, SAVE2, SAVE3, SAVE4Over Scan Image MenuPosition Phase Auto AdjustImage Menu SizeInput Menu Progressive3D-YCS Color SpaceComponent Input MenuM1-D Frame Lock RGBResolution Custom Resolution BOXSetup Menu Setup Menu Audio Menu Using the /// buttons adjusts the menu position Using the / buttons switches the mode for the blank screenScreen Menu Or keep no operation for about 10 secondsScreen Menu Start UPCapturing error has occurred. Please try again MyScreen registration is finishedNo Input is Detected Sync is OUT of RangeMessage Source NameOption Menu Turn on  Turn OFFAuto Search Auto onAuto OFF Option MenuLamp Time MY Button ServiceFAN Speed Filter Message GhostLens Type Factory Reset KEY LockRemote Receiv Remote FreqUsing Security Features Inputting the PasswordChanging the Password SecurityUsing the MyScreen Password Function Description If you have forgotten your PasswordTurning on the MyScreen Password Setting the PasswordUsing the PIN Lock Function Turning the Password offSecurity Registering the PIN CodeTurning Off the PIN Lock Function Description SecurityIf you have forgotten your PIN Code Setting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function Setting the Transition Detector off BOXLive Mode MIU MenuPC-LESS PresentationSetup MIU MenuDefault Gateway IP AddressSubnet Mask Time DifferenceNetwork Mode ModeEncryption SpeedRemove ALL, Remove SD CARD, Remove USB Maintenance Case of replacement by yourselfLamp Type number = DT00771 Replacing the lampLamp warning LampType number = MU03642 Cleaning the air filter Air filterAir filter Take the old battery out Internal clock batteryWill come up. Remove the battery Put a new battery Page Troubleshooting There is no input signalInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Electrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Signal source does not correctly workVolume is adjusted to an extremely low level Audio setting is not correctColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Either the focus and/or horizontal phase settings areWhisper function is working Lamp is approaching the end of its product LifetimeWarranty and after-service SpecificationSpecifications
Top Page Image Contents