Hitachi CP-X608 user manual MIU Menu, Live Mode, Pc-Less, Presentation

MIU Menu

MIU Menu

Consult with your network administrator before connecting to an existing access point on your network. Incorrect network settings on this projector may cause trouble on the network.

Select “MIU” from the main menu to access the following functions.

Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table.

See the User’s Manual - Network Functions for details of MIU operation.

		2%.'5524'5'06#6+10
02	6	672
/#)'2		G5*16
#7&		+0(14/#6+10
5%4''		5'48+%'
/+7126+1
'#5;/'07

NOTE • The factory default setting for DHCP is TURN OFF. If your network has DHCP enabled, and needs to set IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY automatically, please set DHCP to TURN ON. ( 2.5.2

Network Settings of the User’s Manual - Network Functions)

•If you are not utilizing SNTP ( 2.5.7 Date/Time Settings of the User’s Manual - Network Functions), then you must set the DATE AND TIME (56) during the initial installation.

Item	Description
	Selecting this item sets the projector onto the “Live Mode”.
LIVE MODE	On the “Live Mode”, the projector displays the images from the PC
	via Network, supported by “MIU Live Viewer”. ( 1.1 Live Mode of
	the User’s Manual - Network Functions)
	Selecting this item displays the PC-LESS PRESENTATION menu.
PC-LESS	Using the menu is able to make the projector	2%.'5524'5'06#6+10
	display the images stored in SD card or USB	6*7/$0#+.
		5.+&'5*19
PRESENTATION	memory, and realizes a presentation without PC.	&+4'%64;
		&+52.#;5+<'
	( 1.2 PC-LESS Presentation of the User’s
		-';%10(+)
	Manual - Network Functions)

(continued on next page)

54