INPUT Menu
INPUT Menu (continued)
Item
Description
The resolution for the RGB1 and RGB2 input signals can be set on this projector.
(1)In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button.
The RESOLUTION menu will be displayed.
(2)In the RESOLUTION menu select the resolution you wish to display using the ▲/▼ buttons.
Selecting AUTO will set a resolution appropriate to the input signal.
(3)Pressing the ► or ENTER button when selecting a STANDARD resolution will automatically adjust the horizontal and vertical positions, clock phase and horizontal size and automatically select an aspect ratio. The INFORMATION dialog (47) will be displayed.
#761
56#0& Z Z
Z
Z 
RESOLUTION MENU
INFORMATION
RGB
80x 768@ 60
RESOLUTION
(4)To set a custom resolution use the
▲/▼ buttons to select the CUSTOM and the CUSTOM RESOLUTION BOX will be displayed. Set the horizontal (HORZ) and vertical (VERT) resolutions using the
▲/▼/◄/► buttons.
Although not all resolutions are guaranteed.
(5)To save the setting place the cursor on the
The horizontal and vertical positions, clock phase and horizontal size will be automatically adjusted and an aspect ratio will be automatically selected.
After the INFORMATION(47) dialog has displayed for about 10 seconds the screen will return to the RESOLUTION menu displaying the changed resolution.
%7561/4'51.76+10
*14< Z 8'46
Z
37+65'6
CUSTOM RESOLUTION BOX
INFORMATION
RGB
99x 744@ 60
4'51.76+10
#761
56#0& Z Z
Z
%7561/ | Z |
(6)To revert back to the previous resolution without saving changes place the cursor on the
The screen will then return to the RESOLUTION menu displaying the previous resolution.
• For some pictures, this function may not work well.
35