Hitachi CP-X608 user manual Regarding the indicator lamps

Page 67

Troubleshooting

Regarding the indicator lamps (continued)

POWER

LAMP

TEMP

Description

indicator

indicator

indicator

 

 

 

 

 

 

 

 

The cooling fan is not operating.

Blinking

 

 

Please turn the power off, and allow the projector to

 

 

cool down at least 20 minutes. After the projector has

In Red

 

 

Turned

Blinking

sufficiently cooled down, please make confirmation

or

off

In Red

that no foreign matter has become caught in the fan,

Lighting

 

 

etc., and then turn the power on again.

In Red

 

 

 

 

If the same indication is displayed after the remedy,

 

 

 

 

 

 

please contact your dealer or service company.

 

 

 

There is a possibility that the interior portion

 

 

 

has become heated.

 

 

 

Please turn the power off, and allow the projector to

Blinking

 

 

cool down at least 20 minutes. After the projector has

 

 

sufficiently cooled down, please make confirmation of

In Red

 

 

Turned

Lighting

the following items, and then turn the power on again.

or

off

In Red

• Is there blockage of the air passage aperture?

Lighting

 

 

• Is the air filter dirty?

In Red

 

 

 

 

• Does the peripheral temperature exceed 35°C?

 

 

 

 

 

 

If the same indication is displayed after the remedy,

 

 

 

please set FAN SPEED of the SERVICE item in the

 

 

 

OPTION menu to HIGH.

 

 

 

It is time to clean the air filter.

 

 

 

Please immediately turn the power off, and clean or

Lighting

Simultaneous

change the air filter referring to the section “Air Filter”.

In Green

blinking in Red

After cleaning or changing the air filter, please be sure

 

 

 

to reset the filter timer. After the remedy, reset the

 

 

 

power to ON.

 

 

 

There is a possibility that the interior portion

Lighting

Alternative

has become overcooled.

Please use the unit within the usage temperature

In Green

blinking in Red

parameters (5°C to 35°C). After the treatment, reset

 

 

 

 

 

 

the power to ON.

Blinking in

 

 

At least 1 “Power ON” schedule is saved to the

Green for

Turned

Turned

projector.

approx. 3

off

off

(Please refer to the User’s Manual-Network Functions:

seconds

 

 

Schedule Settings for more information.)

NOTE • When the interior portion has become overheated, for safety purposes, the power source is automatically turned off, and the indicator lamps may also be turned off. In such a case, press the “” (OFF) side of the power switch, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again.

67

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Content Fastening the lens cover Contents of packageHOT Part namesProjector HOT!410 11 15 16 Control panelRear panel ComponentLaser pointer 14 It is a beam outlet Remote controlLaser Indicator 14 Back Remote controlSetting up Down ArrangementOn a horizontal surface Suspended from the ceilingFoot Adjusting the projectors elevatorUsing the security bar and slot Security bar Anti-theft chain or wire Security slotSignal source Remote control Speakers Connecting your devicesVCR/DVD player About Plug-and-Play capability Connecting your devicesAUX I/O port SD card slot Angled corner Insert the Wireless Memory Network cardInserting an SD card and USB memory USBConnecting power supply How to use the slot cover lockAC inlet Connector of the power cord to the outlet Putting batteries Remote controlLaser Indicator Laser pointerBack sensor About the remote control signalChanging the frequency of remote control signal Front and top sensorsUsing as a simple PC mouse & keyboard Using as a wired remote controlSTANDBY/ON button Power indicator Power on/offTurning on the power Turning off the powerTemporarily muting the sound Adjusting the volumeSelecting an input signal OperatingSelecting an input signal Searching an input signalSelecting an aspect ratio  For a video signal or s-video signal Adjusting the zoom and focusAdjusting the lens shift Using the automatic adjustment featureCorrecting the keystone distortions Adjusting the positionUse the cursor buttons / to select Auto or Magnify indication will appear on the screen Using the magnify featurePress the on button of Magnify on the remote control Freezing the screenTemporarily blanking the screen Enter button Using the menu functionEasy Menu Advanced MenuEasy Menu Easy Menu Gamma Picture MenuColor Temp Using the / buttons switches the color temperature modePicture Menu Custom and then pressing the button orSAVE1, SAVE2, SAVE3, SAVE4 Active IrisLOAD1, LOAD2, LOAD3, LOAD4 MY MemoryOver Scan Image MenuPosition Size PhaseAuto Adjust Image MenuColor Space Input MenuProgressive 3D-YCSComponent Input MenuM1-D RGB Frame LockCustom Resolution BOX ResolutionSetup Menu Setup Menu Audio Menu Or keep no operation for about 10 seconds Using the /// buttons adjusts the menu positionUsing the / buttons switches the mode for the blank screen Screen MenuStart UP Screen MenuMyScreen registration is finished Capturing error has occurred. Please try againSource Name No Input is DetectedSync is OUT of Range MessageAuto on Option MenuTurn on  Turn OFF Auto SearchAuto OFF Option MenuLamp Time MY Button ServiceFAN Speed Filter Message GhostLens Type Remote Freq Factory ResetKEY Lock Remote ReceivSecurity Using Security FeaturesInputting the Password Changing the PasswordSetting the Password Using the MyScreen Password FunctionDescription If you have forgotten your Password Turning on the MyScreen PasswordRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off SecurityTurning Off the PIN Lock Function Description SecurityIf you have forgotten your PIN Code Setting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function BOX Setting the Transition Detector offPresentation Live ModeMIU Menu PC-LESSMIU Menu SetupTime Difference Default GatewayIP Address Subnet MaskSpeed Network ModeMode EncryptionRemove ALL, Remove SD CARD, Remove USB Type number = DT00771 Replacing the lamp MaintenanceCase of replacement by yourself LampLamp Lamp warningAir filter Type number = MU03642 Cleaning the air filterAir filter Take the old battery out Internal clock batteryWill come up. Remove the battery Put a new battery Page Related messages TroubleshootingThere is no input signal Internal temperature is risingRegarding the indicator lamps Regarding the indicator lamps Signal source does not correctly work Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connectedColor Space setting is not suitable Volume is adjusted to an extremely low levelAudio setting is not correct Color settings are not correctly adjustedLamp is approaching the end of its product Lifetime Not properly adjustedEither the focus and/or horizontal phase settings are Whisper function is workingSpecification Warranty and after-serviceSpecifications
Top Page Image Contents