Hitachi CP-X608 user manual Easy Menu

EASY Menu

From the EASY MENU, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table.

EASY Menu

'#5;/'07=4)$?
#52'%6
#761-';5610'	':'%76'
	
-';5610'	
-';5610'
2+%674'/1&'	014/#.
$4+)*60'55	
	
%1064#56
	
%1.14
	
6+06
	
5*#420'55
9*+52'4	014/#.
/+4414	014/#.
4'5'6
(+.6'46+/'	J
.#0)7#)'	'0).+5*
)QVQ#FXCPEGF/GPW

Item		Description
ASPECT	Using the ◄/► buttons switches the mode for aspect ratio.
	See the ASPECT item in IMAGE menu (30).
AUTO	Using the ► button executes the auto keystone function.
KEYSTONE
	See the AUTO KEYSTONE EXECUTE item in SETUP menu (36).
EXECUTE
KEYSTONE	Using the ◄/► buttons corrects the vertical keystone distortion.
	See the KEYSTONE	item in SETUP menu (36).
KEYSTONE	Using the ◄/► buttons corrects the horizontal keystone distortion.
	See the KEYSTONE	item in SETUP menu (37).

Using the ◄/► buttons switches the picture mode.

The picture modes are combinations of GAMMA and COLOR TEMP settings. Choose a suitable mode according to the projected source.

NORMAL ó CINEMA ó DYNAMIC

	WHITEBOARD ó BOARD(GREEN) ó BOARD(BLACK)
		COLOR TEMP	GAMMA
PICTURE MODE	NORMAL	MID DEFAULT	#1 DEFAULT
	CINEMA	LOW DEFAULT	#2 DEFAULT
	DYNAMIC	HIGH DEFAULT	#3 DEFAULT
	BOARD(BLACK)	Hi-BRIGHT-1 DEFAULT	#4 DEFAULT
	BOARD(GREEN)	Hi-BRIGHT-2 DEFAULT	#4 DEFAULT
	WHITEBOARD	MID DEFAULT	#5 DEFAULT

•When the combination of GAMMA and COLOR TEMP differs from pre-assigned modes above, the display on the menu for the PICTURE MODE is “CUSTOM”. Please refer to the GAMMA (27) and COLOR TEMP (28) items in PICTURE menu.

•When this function is performed, a certain extra such as a line may appear.

(continued on next page)

25