Kodak i600 Series manual Replacing the blotter strips

Page 35

Replacing the blotter strips

Blotter strips collect ink overflow. They should be replaced when there is a build-up of ink. Replacement blotter strips may be purchased through your supplier.

1.Open the pod.

2.Use the green tab to lift and remove the ink blotter strip cover to access the front blotter strips.

Remove Ink Blotter Strip cover

3.Carefully pull the blotter strip(s) off the transport. You can replace one or both of the strips as necessary..

4.Discard the soiled strip(s)

5.Peel the backing away from the blotter strip.

A-61500 April 2007

4-7

Image 35

Contents Page Contents Appendix a Introduction Scanner models Optional accessories Scanner features Supporting documentation Speed/capacity ThroughputInformation Safety informationUser precautions EnvironmentalAcoustic emission EMC statementsGetting Started Making connections Scanner components Front view Stop/Pause and Start/Resume buttons Internal components Rear view Starting and stopping scanning Using the ScannerTurning the scanner on and off Manually ending scanning Automatically pausing and resuming the scannerMaterials Document preparationAdjusting the side guides and end stop Locking the side guides Adjusting the back of the output trayForward detent positions Exit deflector Adjusting the optional short document tray Automatic feeding Continuous feeding Press Start/Resume Manual feedingSelect Kodak Scanner Calibrating the scannerImage calibration Page Click Calibrate Page Overview Enhanced PrinterFont size Printer specificationsChanging print positions Page Replacing the ink cartridge Page Replacing the blotter strips Page Maintenance Cleaning frequency chart Cleaning tools and materials Ordering parts Supplies and accessoriesOpening the pod Cleaning the output tray and elevator areaCleaning the separation roller tires Cleaning the drive rollersCleaning the feed module tires Close the printer access cover April Cleaning the scanner transport area Cleaning the imaging guides Cleaning the background stripsPage Running a transport cleaning sheet Replacing the feed module or feed module tires Replacement proceduresPage Locking tab Locking tab Slot Replacing the separation roller or separation roller tires Guides Replacing the preSeparation pad Replacing the imagingIndicator lights TroubleshootingScanner is in sleep mode and has detected a hardware error Accessing the Operator Log Page Page ID# Message listingApril Informational message. The pod was closed Informational message. Scanner paused April Listing Numerical messageApril Problem Possible Solution Problem solvingMaintenance Appendix a Accessories Scanner Type/Speed Appendix B Specifications