Kodak i600 Series manual Cleaning the background strips, Cleaning the imaging guides

Page 45

Cleaning the background strips

18.Using the green tabs pull off the upper and lower background strips and set them aside.

Lower strip

Upper strip

19.Vacuum the areas where the background strips are adhered to.

20.Reinstall the upper and lower background strips.

Cleaning the imaging guides

21.Turn the screw on each end of the upper imaging guide, remove it from its position and set it aside.

Lower imaging guide

22.Turn the screw on each end of the lower imaging guide, remove it from its position and set it aside.

A-61500 April 2007

5-9

Image 45

Contents Page Contents Appendix a Introduction Scanner models Optional accessories Scanner features Supporting documentation Speed/capacity ThroughputUser precautions Safety informationEnvironmental InformationAcoustic emission EMC statementsGetting Started Making connections Scanner components Front view Stop/Pause and Start/Resume buttons Internal components Rear view Using the Scanner Turning the scanner on and offStarting and stopping scanning Manually ending scanning Automatically pausing and resuming the scannerMaterials Document preparationAdjusting the side guides and end stop Locking the side guides Adjusting the back of the output trayForward detent positions Exit deflector Adjusting the optional short document tray Automatic feeding Continuous feeding Press Start/Resume Manual feedingCalibrating the scanner Image calibrationSelect Kodak Scanner Page Click Calibrate Page Overview Enhanced PrinterFont size Printer specificationsChanging print positions Page Replacing the ink cartridge Page Replacing the blotter strips Page Maintenance Cleaning frequency chart Cleaning tools and materials Ordering parts Supplies and accessoriesOpening the pod Cleaning the output tray and elevator areaCleaning the separation roller tires Cleaning the drive rollers Cleaning the feed module tires Close the printer access cover April Cleaning the scanner transport area Cleaning the imaging guides Cleaning the background stripsPage Running a transport cleaning sheet Replacing the feed module or feed module tires Replacement proceduresPage Locking tab Locking tab Slot Replacing the separation roller or separation roller tires Separation pad Replacing the preReplacing the imaging GuidesIndicator lights TroubleshootingScanner is in sleep mode and has detected a hardware error Accessing the Operator Log Page Page ID# Message listingApril Informational message. The pod was closed Informational message. Scanner paused April Listing Numerical messageApril Problem Possible Solution Problem solvingMaintenance Appendix a Accessories Scanner Type/Speed Appendix B Specifications