Kodak i600 Series manual Locking tab Slot

Page 51

12.Align the tabs on the upper housing with the slots on the lower housing.

Locking tab

Slot

13.Press the upper and lower housings together until they snap into place.

14.Reinstall the feed module by aligning the pins, fitting it into position and pulling up on the release lever to lock it into place. Verify that the feed module is securely in place and moves freely after you install it.

Align these areas

15.Close the pod.

16.Close the printer access cover.

17.Reinstall the output tray.

A-61500 April 2007

5-15

Image 51

Contents Page Contents Appendix a Introduction Scanner models Optional accessories Scanner features Supporting documentation Speed/capacity ThroughputInformation Safety informationUser precautions EnvironmentalAcoustic emission EMC statementsGetting Started Making connections Scanner components Front view Stop/Pause and Start/Resume buttons Internal components Rear view Using the Scanner Turning the scanner on and offStarting and stopping scanning Manually ending scanning Automatically pausing and resuming the scannerMaterials Document preparationAdjusting the side guides and end stop Locking the side guides Adjusting the back of the output trayForward detent positions Exit deflector Adjusting the optional short document tray Automatic feeding Continuous feeding Press Start/Resume Manual feedingCalibrating the scanner Image calibrationSelect Kodak Scanner Page Click Calibrate Page Overview Enhanced PrinterFont size Printer specificationsChanging print positions Page Replacing the ink cartridge Page Replacing the blotter strips Page Maintenance Cleaning frequency chart Cleaning tools and materials Ordering parts Supplies and accessoriesOpening the pod Cleaning the output tray and elevator areaCleaning the separation roller tires Cleaning the drive rollersCleaning the feed module tires Close the printer access cover April Cleaning the scanner transport area Cleaning the imaging guides Cleaning the background stripsPage Running a transport cleaning sheet Replacing the feed module or feed module tires Replacement proceduresPage Locking tab Locking tab Slot Replacing the separation roller or separation roller tires Guides Replacing the preSeparation pad Replacing the imagingIndicator lights TroubleshootingScanner is in sleep mode and has detected a hardware error Accessing the Operator Log Page Page ID# Message listingApril Informational message. The pod was closed Informational message. Scanner paused April Listing Numerical messageApril Problem Possible Solution Problem solvingMaintenance Appendix a Accessories Scanner Type/Speed Appendix B Specifications