Replacing the
ink cartridge carrier
10.Remove the backing from a new blotter strip.
11.Align the blotter strip in one of the channels.
12.Press the adhesive side of the blotter strip down firmly into the channel.
13.Repeat Steps
14. Lower the scanner door and press it firmly until it snaps into place.
To order ink cartridge carriers, refer to Appendix B, Supplies and Accessories.
1.Locate the imprinter access door on the back of the scanner.
2.Slide your fingers under the imprinter access door handle and pull the door toward you.
3.Lift the imprinter access door off the scanner.
4.Slide the ink cartridge carrier out of its position.
5.Raise the locking bar.
6.Remove the ink cartridge, if one is present.
7.Squeeze the metal strips on the connector and pull the connector away from the ink cartridge carrier.
8.Push the connector firmly into a new ink cartridge carrier.
9.Replace the ink cartridge.
10.Lower the locking bar around the ink cartridge.
11.Slide the ink cartridge carrier back into its position.
12.Replace the imprinter access door.