Kodak A-61167 manual Using the flatbed, Book scanning

Page 62

Using the flatbed

Use the flatbed to scan documents that cannot be scanned using the automatic document feeder (ADF).

1.Raise the input tray and rest it against the scanner, if necessary.

2.Lift the flatbed cover and hold it up.

3.Place the document face down on the glass platen.

4.Position the document with the corner aligned with the arrow.



	Arrow
	5.	Close the flatbed cover.
	6.	Start scanning.
Book scanning	You can use the flatbed to scan thick or bound documents, such as books. The
	flatbed cover rises to accommodate bound materials. It can also be lifted off
	and removed to allow scanning very thick books.
	1.	Raise the input tray and rest it against the scanner, if necessary.
	2.	Lift the flatbed cover and hold it up.
	3.	Place the book face down on the glass platen.

4.Position the book with the corner aligned with the arrow.

5.Close the flatbed cover.

6.Start scanning.

A-61167 April 2005

D-3

Image 62

Contents User’s Guide Contents Using the Scanner TroubleshootingAppendix D Kodak i200 Series Dockable Flatbed Scanner features IntroductionMaintenance Paper transport featuresImage quality features Speed/Capacity ThroughputOptional accessories Preparing documents for scanning Recommended documents Safety information User precautionsSafety and regulatory agency approvals Environmental information Acoustic emission Power system Japan EMC statementsUnited States TaiwanInstalling the Scanner Site specificationsSystem requirements Front Unpacking the scanner Registering your scannerScanner components Internal RearSide Making connections Power setup Page Page Tray extenders and side guides Page Continuous feeding Using the ScannerStarting and stopping scanning Automatic feeding Manual feeding Damaged documentsSpecial Document mode Additional featuresLong Paper mode Toggle patch Perfect Page withIThresholding Maintenance Cleaning the scannerCleaning the separator module Front roller cover Page Cleaning the imaging guides CAT No Replacing partsCleaning the paper path Click Calibrate Lamps Clearing document jams TroubleshootingIndicator lights Adjusting the separator module tension System is not responding Color image quality Problem solving Problem Possible SolutionProblem Possible Solution Transporting the scanner Appendix a Specifications Scanner Weight Power SourceScanner Dimensions DimensionsAppendix B Supplies and Accessories Contents of the imprinter kit Appendix C Kodak i200 Series ImprinterInstalling the imprinter Removing the circuit board coverAttaching the imprinter board and cable Thumbscrews Hook Imprinter connector Page Page Completing the imprinter installation Page Installing the ink blotter strips Installing an ink cartridge Setting the imprinter position Imprinter maintenance Replacing the ink blotter strips Replacing Ink cartridge carrier Print characters Printable Character SetImprinter specifications Appendix D Kodak i200 Series Dockable Flatbed Contents of the dockable flatbed kit Flatbed specificationsInstalling the dockable flatbed Remove the scanner front panel Using the flatbed Book scanningClick Calibrate Cleaning the flatbed After a power failure Removing the dockable flatbed Press firmly against the right side of the door to latch it Scanner Model Document Size Basic Memory Total Memory Appendix E Installing Optional MemoryInstalling memory in the scanner Circuit board cover Remove the existing memory card from the main control board Eastman Kodak Company