Safety information
•When placing the scanner, make sure that the electrical power outlet is located within 1.52 metres (5 feet) of the scanner and is easily accessible.
CAUTION: The scanner and power supply must only be used indoors in a dry location.
•Material Safety Data Sheets (MSDS) for information about chemicals used in Kodak products are available on the Kodak web site at www.kodak.com/go/MSDS. Refer to Appendix B, “Supplies,” for catalog number information.
Warning labels
CAUTION: High voltage. Avoid contact.
CAUTION: Hot surface. Avoid contact.
CAUTION: Moving parts. Avoid contact.
User precautions
WARNING: The scanner front panel must be in place and closed during scanner operation.
The imprinter access door must be in place and closed during scanner operation, except when changing the printhead location or replacing the ink cartridge.
When the imprinter access door is removed, DO NOT allow loose clothing, jewelry, hair, or other objects to enter the imprinter area.
Users and their employer need to observe the common sense precautions applicable to the operation of any machinery. These include, but are not limited to, the following:
•Do not wear loose clothing, unbuttoned sleeves, etc.
•Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc.
•Hair should be kept short, using a hair net if needed or by tying long hair up in a bun.
•Remove all loose objects from the area that could be drawn into the machine.
•Take sufficient breaks to maintain mental alertness.
Supervisors should review their practices and make the compliance with these precautions a part of the job description for the operator of the Kodak i200 Series Scanners and any other mechanical devices.
5 |