Lexmark ER-A180, ER-A160 Introduction, U T I O N, Never operate the register with wet hands

INTRODUCTION

Thank you very much for your purchase of the SHARP Electronic Cash Register, Model ER-A160/ER-A180. Please read this manual carefully before operating your machine in order to gain full understanding of functions and features.

Please keep this manual for future reference, it will help you, if you encounter any operational problems.

C A U T I O N !

Never install the batteries into the cash register before initializing it. Before you start operating the cash register, you must first initialize it, then install the batteries. Otherwise, distorted memory contents and malfunction of the cash register will occur. For their procedures, please refer to page 6.

IMPORTANT

•Install your register in a location that is not subject to direct radiation, unusual temperature changes, high humidity or exposed to water sources.

Installation in such locations could cause damage to the cabinet and the electronic components.

•Never operate the register with wet hands.

The water could seep into the interior of the register and cause component failure.

•When cleaning your register, use a dry, soft cloth. Never use solvents, such as benzine and/or thinner.

The use of such chemicals will lead to discoloration or deterioration of the cabinet.

•The register plugs into any standard wall outlet (Official (nominal) voltage).

Other electrical devices on the same electrical circuit could cause the register to malfunction.

•If the register malfunctions, call your local dealer for service - do not try to repair the register yourself.

•For a complete electrical disconnection, pull out the mains plug.

English

English English English

1