Xerox 8560MFP/8860MFP manual Microsoft IPP Port, Select Properties

Windows 2000 or Later

Microsoft IPP Port

Follow these steps to obtain the printer’s URL and create an Internet Printing Protocol (IPP) printer.

Obtaining the Printer’s URL (Network Path)

To obtain the printer’s URL:

1.Launch your web browser.

2.Enter your printer's IP address in the browser’s Address field.

3.Select Properties.

4.Select the Protocols folder on the left navigation panel.

5.Select IPP. The Network Path field on the IPP Settings page displays the printer’s URL.

Creating an IPP Printer

To create an IPP printer:

1.On the desktop, click Start, click Settings, and then click Printers.

2.Double-click Add Printer to launch the Microsoft Add Printer Wizard.

3.Select Network Printer, and then click Next.

4.When prompted for URL (Windows 2000, Windows XP), enter the printer’s URL in the following format:

http://printer-ip-address/ipp

Note: Substitute your printer’s IP address or DNS name for printer-ip-address.

5.Click Next.

Configuring the Printer

To configure the printer:

1.Insert the Software and Documentation CD-ROMinto the computer’s CD-ROM drive and click Have Disk.

2.Click the Browse button, and then select the directory which contains the Windows 2000 or Windows XP drivers.

3.Select the *.INF file, and then click Open.

4.Verify that the path and filename are correct, and then click OK.

5.Enter a name for the printer and select whether you want that printer to be the default. Click Next.

6.Select one of these options:

■If the printer is not shared, click Next.

■If the printer is shared, enter a Share Name, check the Share box, and then click Next.

7.Click Next.

Phaser® 8560MFP/8860MFP Multifunction Printer

3-7