Xerox 8560MFP/8860MFP manual Click Properties

Printer Settings

Using the Control Panel

To select a Tray 1 mode setting on the control panel:

1.Press the System button.

2.Select Paper Tray Setup, and then press the OK button.

3.Select Tray 1 Mode, and then press the OK button.

4.Select the appropriate setting, and then press the OK button.

Using CentreWare IS

To select a Tray 1 mode setting using CentreWare IS:

1.Launch your web browser.

2.Enter the printer’s IP address in the browser’s Address field.

3.Click Properties.

4.Select the General folder on the left navigation panel, and then select System Defaults.

5.Select the appropriate setting in the Tray 1 Mode drop-down list.

6.Click the Save Changes button at the bottom of the page.

Phaser® 8560MFP/8860MFP Multifunction Printer

4-10