Xerox 8560MFP/8860MFP Paper Tray Settings, Selecting Tray 1 Mode, SettingDescription Dynamic

Printer Settings

Paper Tray Settings

This section includes:

■Selecting Tray 1 Mode on page 4-9

■Setting the Duration for the Tray 1 Prompt on page 4-11

■Selecting Tray 2-N Mode on page 4-12

■Setting the Duration for the Tray 2–N Prompt on page 4-13

■Changing the Load Paper Timeout on page 4-14

■Printer Security on page 4-15

Note: For information about selecting options for specific copy, scan, and fax functions, see Copying, Scanning, or Faxing in the User Guide at:

■www.xerox.com/office/8560MFPsupport (Phaser 8560MFP Printer)

■www.xerox.com/office/8860MFPsupport (Phaser 8860MFP Printer)

Selecting Tray 1 Mode

The Tray 1 Mode setting specifies:

■How Tray 1 paper type and size are determined when you load paper in the tray but do not select the paper type and size on the control panel.

■When Tray 1 is used for print jobs.

SettingDescription

Dynamic

(Factory default setting)

■Uses the settings from the next print job that prints from Tray 1 to determine the paper size and type.

■Printer will print from Tray 1 when specified in the print job or when no other tray has the job's requested paper size and type.

Static	■ The paper size and type already set for Tray 1 stay in effect.
	■ Printer will print from Tray 1 when specified in the print job or when no
	other tray has the job's requested paper size and type.
Automatic	■ Uses the settings from the next print job that prints from Tray 1 to
	determine the paper size and type.
	■ Printer will print from Tray 1 when paper is loaded, unless a different
	tray is specified in the printer driver.

To select the Tray 1 mode setting, use one of the following options:

■The printer’s control panel

■CentreWare IS

Phaser® 8560MFP/8860MFP Multifunction Printer

4-9