Xerox 3 manual Quick Install Steps, DLC/LLC Protocol, Select the Hewlett-Packard Network Port

Windows NT 4.x Network
Quick Install Steps	1	At the Desktop, right mouse click the Network
(DLC/LLC Protocol)		Neighborhood icon and select Properties.
	2	Click on the Protocols TAB and verify that the DLC/LLC
		protocol has been loaded.
	3	If this software is not present, install it using the
		documentation provided by Microsoft. Then return to
		this document.
	4	Open the Control Panel and double-click Printers icon.
	5	Double-click Add Printer.
	6	The Add printer Wizard starts.
	7	Verify that My Computer is selected and click Next>.
	8	Click Add Port.
	9	Select the Hewlett-Packard Network Port in the
		Available Print Monitors box and click OK.
	10	Enter a unique name for the port to be used in the area
		provided.
	11	Choose the Port Address from the list of ports.
	12	Click Timers and verify that the Job Based connection is
		selected then click OK.
	13	Click OK. The Wizard will return you to the previous

dialog. Verify the new port name you entered is in the list and correct. The check box to the left of the port name must be checked if it is not, check it then select Next>.

18 ❖ Quick Network Install Guide