Xerox 3 manual AppleTalk Protocol, Select the AppleTalk Printing Devices and click New, Port

Windows NT 4.x Network
Quick Install Steps	1	At the Desktop, right mouse click the Network
(AppleTalk Protocol)		Neighborhood icon and select Properties.
	2	Click on the Protocols TAB and verify that the AppleTalk
		protocol has been loaded.
	3	If this software is not present, install it using the
		documentation provided by Microsoft. Then return to
		this document.
	4	Open the Control Panel and double-click Printers icon.
	5	Double-click Add Printer.
	6	The Add printer Wizard starts.
	7	Verify that My Computer is selected and click Next>.
	8	Click Add Port.
	9	Select the AppleTalk Printing Devices and click New
		Port.
	10	Click on Ethernet and select the device.
	11	Choose your printer device from the list then click OK.
	12	Click OK. The Wizard will return you to the previous
		dialog. Verify the port name you entered is in the list and
		correct. The check box to the left of the port name must
		be checked if it is not, check it then select Next>.
	13	Insert your printer CD-ROM and click Have Disk.

20 ❖ Quick Network Install Guide