Xerox 3 manual Appendix a Print Configuration Sheet, For DocuPrint Networked Printers

Page 43

Appendix A: Print The Configuration Sheet

Appendix A: Print The

Configuration Sheet

For DocuPrint Networked Printers

It is important to print a Configuration Sheet for proper setup of the printer on the network. The information will be used to verify NIC address, verify enabled printer options, to check printer IP address, to check the print server name in the case of a Novell network, and to verify the AppleTalk name or zone if used in an AppleTalk network. The default settings are suitable for most applications.

To print the Configuration Sheet from the Printer's Control Panel:

If you change any settings print another Configuration Sheet to verify that the changes were made as desired.

1 Press Menu Up or Menu Down until you see:

Me nus

Print Menu

on the Display.

2 Press Item Up or Item Down until you see:

Print Menu

Config Sheet

on the Display.

Quick Network Install Guide 43

Image 43
Contents DocuPrint Quick Network Install Guide Quick Network Install Guide Contents Contents Requirements Additional information Purpose of This DocumentPrinter System Administrator Guide to correct How to Use this DocumentNext Windows 95/98 Peer-to-Peer NetworkNetworked Printers Found in the printer CD ROM Instruction bookletWindows 95/98 Peer-to-Peer Network Windows 95/98 Peer-to-Peer Network Quick Install Steps To change the group name in a NetBEUI-only network Type yes to confirm the monitor session Windows 95/98 Users Introduction Preliminary Steps Windows NT 4.x NetworkAdd printer Wizard starts TCP/IP ProtocolClick Add Port Click New Port Printer System Administrator Guide to correct DLC/LLC Protocol Quick Install StepsSelect the Hewlett-Packard Network Port If the printer will not be shared, click Next. To share Select the AppleTalk Printing Devices and click New AppleTalk ProtocolPort CD Drive\instal\winnt40 then click Open Windows 2000 Network Inside the Network and Dial-up Connections window Click in the Printer Name or IP Address edit box, Select Standard TCP/IP Port from the New Port TypeWindows 2000 Network Windows 2000 Network Select the Hewlett-Packard Network Port from the New DLC/LLC ProtocolPage. Click Next Printer System Administrator Guide to correct Properties Network and Dial-up Connections window and secectSelect the AppleTalk Printing Devices from the New Next Printer System Administrator Guide to correct Macintosh EtherTalk Network Document in Appendix a Print The ConfigurationSheet Novell NetWare 3.1x, 4.1x Networks Quick SetupPrinter System Administrator Guide to correct the problem Novell NetWare 3.1x, 4.1x, 5.x Networks Are found in the Technical Information Guide OS/2 Warp Server LAN Server NetworkOS/2 Warp V4.0 OS/2 Warp Connect Peer-to-Peer Network IBM AIX Unix NetworkSunos and Solaris Refer to the CentreWare DP user Go to Appendix B Set an IP Address and perform oneAvailable on the Printer Management Software CD-ROM Internet Printer Services Configure your Web Browser For DocuPrint Networked Printers Appendix a Print Configuration SheetPress Enter. The Configuration Sheet will be printed Appendix B Set an IP Address RARP/BOOTPStatic Addressing Appendix B Set an IP Address Dynamic Addressing RARP/BOOTP Dynamic Addressing Dhcp Document entitled Appendix a Print The Configuration Sheet Dynamic Addressing Dhcp or RARP/BOOTP Type Telnet x.x.x.x CR Arp -s x.x.x.x aa-aa-aa-aa-aa-aa CRArp -s ether name 0081aaa no leading zeros RS-6000 X.x nameArpbypass set name 0x00.0x00.0x81.0xa.0xa.0xa AT&T and NCR Appendix B Set an IP Address Quick Network Install Guide
Related manuals
Manual 4 pages 48.38 Kb