Xerox 4595 manual Finisher D2 may be referred to simply as the Finisher

1. Product Overview

No.	Component	Function
27	Post-process inserter	Load paper for cover or transparency separators. Paper loaded here is
	(Cover/Transparency	not used for copying.
	separator tray) / Tray 8
28	Decurl button	For lighter weight paper especially, press this button to decurl the output.
29	Output tray	Copies are delivered here when specific output features are selected,
		such as Automatic sorting, Collated, Uncollated, or Normal.
30	Finisher tray	Receives copies when you select stapled, punched, and Z-folded copies.
31	Booklet output tray	Receives copies when you select Bi-Fold or Bi-Fold + Stapling.
32	Booklet output tray button	Press this button to deliver and retrieve booklets from the output area.
33	Right cover	Open to clear paper jams, replace staples, clear jammed staples, or
		remove the scraps from the puncher.
34	Staple cartridges for	There are two staple cartridge for booklet. Remove this cartridge to
	booklet	replace staples and clear staple jams.
35	Staple cartridge	Contains staples; remove this cartridge to replace staples and clear
		staple jams.
36	Punch scrap container	Collects the scraps from the puncher. Open to remove the scraps.
37	Tri-Fold output tray	Receives copies when you select Tri-Fold In or Tri-Fold out.
	(optional)
38	Tri-Fold output tray button	Press this button to open tri-Fold output tray.
39	Left cover.	Open this cover to access the machine and to clear paper jams.
40	Staple cartridge storage	Staple cartridge for replacement can be stored (D Finisher only).
	space
		NOTE 1: Throughout this guide, Finisher D, Booklet Finisher D, or
		Finisher D2 may be referred to simply as the Finisher.
		NOTE 2: Throughout this guide, the Duplex Automatic Document
		Feeder is abbreviated as “Document Feeder” or “DADF.”

1- 7 Xerox 4595 Copier/Printer Getting Started