Xerox 4595 manual About the circuit breaker, Power off

Page 19

1. Product Overview

Power off

Perform the following to power off the machine:

1.Before switching off the power ensure that all copy or print jobs have completely finished. Furthermore, ensure that the <Online> indicator is not lit.

KEY POINT 1: Switching off the power before copy/print jobs are complete loses any data that is being processed.

KEY POINT 2: Never switch off the power while:

–While data is being received

–While jobs are being printed.

–While jobs are being copied

–While a scan is being executed

2.Press the power switch to the off position [ ].

KEY POINT: The power off process continues internally after the power switch is turned off. Therefore, do not immediately unplug the power cord from the power outlet.

NOTE: If you have switched off the power, wait ten seconds before switching on the power again.

About the circuit breaker

This product is equipped with a circuit breaker.

The circuit breaker is normally On ("l") position, as shown in the figure. If power to the machine is interrupted, the circuit breaker trips and the switch is in the Off (“O”) position.

If the breaker is Off ("O") position, contact your Customer Support Center as there might be some unusual conditions.

Xerox 4595 Copier/Printer Getting Started

1-13

Image 19

Contents Version 1.2, January StartedPage Table of contents Problem Solving MaintenanceSafety and Notices Xerox 4595 Copier/Printer Getting Started Iii Table of contents Xerox 4595 Copier/Printer Getting Started Related information sources Customer documentation updates12a 12b Machine componentsComponent Function 25 24 23 22 Component Function Finisher Finisher D2 may be referred to simply as the Finisher D2 Finisher International Control Panel no words Control PanelControl Panel with words Online indicator This lights when data is Component Function Feature buttons Power on Power on/offAbout the circuit breaker Power offPower Saver mode Basic copying and scanning Basic OperationDocument Glass Loading documentsCopy/Scan procedure Basic Operation Basic Operation Basic Operation Basic Operation Basic Operation Select Scan to Mailbox Canceling a copy or scan job Basic Operation Printing Select Check Mailbox Print Copy & Print Jobs documents procedureSelect Document List Select Copy & Print JobsSelect the desired item or items Select Print Select the Change Settings / Print buttonBasic Operation Xerox 4595 Copier/Printer Getting Started This is called Automatic Tray Selection About paperPaper types in the trays Automatic tray selectionLoading paper in Trays 1 Loading paper in Trays 3 Loading paper in tray 5 Bypass Loading paper in optional HCF Trays 6 Loading Paper Loading paper in Tray 8 Post-Process Inserter Loading tab stock into any tray Load tab paper in trays 3 to Loading tab paper in Tray 5 Bypass Loading tab paper in Tray 8 Post-process inserter Change/confirm the tray settingsSelect either Auto Size Detect or Variable Setup Menu Select Paper Tray AttributesSelect Paper Type/Color Copy job with tabs Copy/print on tabsNetwork print on tabs with the PS print driver Network print on tabs with the PCL print driverSupply items MaintenanceCustomer Replaceable Units CRUs Image quality problems Fault clearancePaper jams Electrical safety Safety noticesDisconnect device North America Laser safetyEurope and other markets Safety standardsOperational safety Maintenance safetyOzone safety Canada ICES-003 Radio frequency emissions FCC in the USARegulatory information for Rfid Certifications in Europe Safety extra low voltage approvalUSA It’s illegalDependency Status Canada Other countries Environmental notices for the USAEuropean union Product recycling and disposalWeee Directive2002/961EC Other countries