Fax Setup
The Phaser 3635MFP/X configuration has Fax installed as standard. The Fax Kit will require setup when the machine is installed.
Setting up the Fax Kit
1Set up the Fax Kit using the instructions in the Kit.
2Connect the telephone line to the
Line connector on the device.
3 If you wish to attach a handset to the device, connect the handset to the Ext. connector.
4Press the Log In/Out button to enter
the Tools pathway.
5On the numeric keypad enter [1111]
or the current passcode and select Enter.
6 Press the Machine Status button then select Tools > User Interface >
Service Enablements > Embedded
Fax. The Fax Install Screen will appear.
7Select the required (or nearest) country location by selecting the entry in the Country Setup list and select Next.
8Select the required dialing method. For a tone line select Tone. For a 10 pulse per second line select Pulse. If in doubt, select Tone.
9Select the keypad symbol for Fax Number and enter the fax telephone number for the device.
10Select the keypad symbol for Machine Name and enter a custom name for the device.
11Select Save and Close. The device will reboot. The machine will now send and receive fax transmissions using default settings. If you wish to change the Fax Setup enter the Tools Pathway as described in steps 4 and 5 and select Tools > User Interface > Embedded Fax. The various Fax options can be selected and changed.
16 | quick use guide |