Xerox 3635MFP manual Network Setup Using a Static IP Address

Page 15

•On the Control Panel, press the Log In/Out button and then enter the Administrator passcode [1111] and select Enter.

•Press the Machine Status button then select Tools > Connectivity and

Network Setup > Advanced > Network Setting > Network Setup > TCP/ IP Options > TCP/IP Settings.

•The allocated TCP/IP address is in the Name/Address field.

2Confirm that an IP address has been allocated and that it is an appropriate IP address for your network.

NOTE: If the IP address starts with 169.xxx.xxx.xxx, the DHCP server has not properly allocated an address or DHCP is not enabled on your network. Contact your network administrator for assistance.

Network Setup Using a Static IP Address

Before you begin, obtain the following information from your network administrator:

•IP Address

•Gateway Address

•Subnet Mask

•DNS Server Address

1Press the Log In/Out button on the Control Panel, enter the

Administrator’s passcode [1111] and select Enter.

2 Press the Machine Status button then select Tools > Connectivity and Network Setup > Advanced > Network Setting > Network Setup > TCP/IP Options.

3Select HTTP and Enable. Select Save.

4Select TCP/IP Settings.

5Select the Dynamic Addressing

button. By default, DHCP will be selected. Select Disabled to disable DHCP and select Save.

6Select Name/Address. Enter the Host Name, by selecting the Keyboard symbol. Enter the IP Address by touching each box and entering the number using the Numeric Keypad. Select Save.

7Select Subnet and Gateway. Enter the Subnet Mask and IP Gateway. Select Save.

8If you do not wish to configure DNS settings proceed to the next step. If you wish to configure DNS settings select the DNS Configuration button. Enter the Domain Name and the Preferred DNS Server address. Select Save.

English

quick use guide

11

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Phaser 3635MFP Page Phaser 3635MFP Quick Use Guide Page Contents Xerox Phaser 3635MFP Quick Use GuideAL7 1BU England Install the Phaser 3635MFP Card Reader slot Green LED Switch On the MachineQuick use guide Inside the Device Your Phaser 3635MFPDescription Control Panel OverviewLoading Documents Load Paper into the Paper TraysQuick use guide Test the device Connecting to the NetworkNetwork Connection using TCP/IP Network Setup Using DhcpSelect TCP/IP Settings Select the Dynamic Addressing Network Setup Using a Static IP AddressQuick use guide Click Install Drivers Click Install Print Drivers Install Print DriversClick Properties Connectivity Protocols TCP/IP Mail SetupClick Apply to confirm your settings Fax Setup Setting up the Fax KitService Enablements Embedded Installing Option Kits Installing Option KitsNetwork Accounting Server Fax Enable Server FaxMaking Copies Quick use guide Creating booklets Additional Copy FeaturesImage quality adjustment Reduce / EnlargeAdvanced tab contains various font and printing options Printing a DocumentToner Saver Additional Print FeaturesSaved settings Rotate imageSending a Fax Sided Scanning -1-sided orBackground Suppression Set up an Address Book Additional Fax FeaturesDelayed send Change the resolutionNetwork Scanning Templates Use Resolution Update File FormatCreating Scanning Templates Additional Network Scanning FeaturesOutput Color Lighten/Darken Original Size Press the Services Home button on the Control PanelResolution Sending an E-mailEnhance your Phaser’s productivity Remote Administration Customize your deviceOn-line Address Book Powerful Documents Send paper documents as E-mailEasy Consumable Management Problem Solution TroubleshootingDocument jams Paper jamsOn the Print Driver HelpOn the device DocumentationOn CentreWare Internet Services Select Printing Preferences Enable/Disable Banner SheetDisable the Banner Sheet in the Print Driver Disable the Banner Sheet at the PrinterQuick use guide
Top Page Image Contents