Xerox 3100MFP/S manual Simple copy, ECO mode copy, Advanced copying, ID Card Copy mode

Copy

Your machine has the ability to make one or more copies.

You can also set up several parameters in order to make copies at your will.

Simple copy

In this case, the default parameters are applied.

1Place the document face down on the document glass, aligned with the registration arrows near the top left of the document glass.

2Press the button twice. The copy is made using the default parameters.

ECO mode copy

The ECO mode enables you to reduce the amount of toner consumed on the page so as to save your printing costs.

When the ECO mode is used, the toner consumption is reduced and the print density becomes lighter.

1Place the document face down on the document glass, aligned with the registration arrows near the top left of the document glass.

2Press the button.

3Press the button.

Advanced copying

Advanced copy allows the user to do custom setups for the current copy job.

1Place the document face down on the document glass, aligned with the registration arrows near the top left of the document glass.

After step 1, you can directly enter the number of copies with the numerical

Note keypad and press the OK button to confirm. Then refer to step 4.

2Press the button.

3Enter the number of copies that you want and confirm with the OK button.

4Choose the paper tray AUTOMATIC or MANUAL

(see examples below): 1 Page to 1, 1 Page to 4 or

1 page to 9.Copy -3

Confirm with the OK button.

6Adjust the desired zoom level, from 25% TO 400%

with the buttons or , confirm with the OK button (only available in 1 Page to 1 copy mode).

7Adjust the desired origin values with the digital

keyboard buttons or then confirm with the OK button.

8Choose the resolution depending on the printing quality that you want AUTO, TEXT, PHOTO or

10Adjust the desired brightness level with the buttons

or , then confirm with the OK button.

11 Choose the paper type NORMAL, THICK with the buttons or , then confirm with the OK button.

ID Card Copy mode

The ID CARD copy function is used for copying both sides of an identity card or driver’s license type document on an A4 format sheet (original document size < A5) or on a Letter format sheet (original document size < Statement).

The LCD screen displays useful operating instructions (when the original document should be placed, when the document should be turned over, etc.) and asks for your confirmation to proceed with the operation.

1 Press the button.

2Enter the desired number of copies and confirm with the OK button.