Screen-saver Mode
The LCD goes out if the machine is not operated for about five minutes*.
* You cannot change the wait time before the LCD goes out.
Note
When you want to restore the display, perform a print operation or press any button except for the
ON/OFF button. When you press the ON/OFF button while the machine is in
Handling the Original Document
This section describes how to load the original document on the Platen Glass.
•Original Document Requirements
The original documents you load on the Platen Glass for copying or scanning must meet these requirements:
Document type | • | Paper documents |
| • | Photographs |
| • | Books |
Size (W x L)Max. 8.5 x 11.7 inches / 216 x 297 mm
Thickness | Max. 0.6 inches / 15 mm |
Loading Original Documents
Load originals to copy or scan on the Platen Glass.
Note
Make sure any glue, ink, correction fluid, or the like on the original document is completely dry before loading it on the Platen Glass.
1
2
Lift the Document Cover.
Load the original with the side to be
copied / scanned facing down on the Platen Glass.
•To make copies or scan documents
Place the original in landscape orientation and align the upper corner of it with the alignment mark as shown in the figure on the right.
Platen Glass
Before Using the Machine | 9 |