2 Load the envelopes.
(1)Load the envelope against the right side of the Rear Tray.
Load with the address side facing
UP and the rear flaps DOWN on the left.
Up to 10 envelopes can be loaded at once.
(2)Pinch the Paper Guide and slide it against the left side of the envelope.
(3)Set the Paper Thickness Lever to the right.
Note
Reset the Paper Thickness Lever to the left when you finish printing. For details on
the Paper Thickness Lever, refer to "Inside" in "Main Components" of the User's Guide
(B)
(1)
(2)
(A)
(3)
(A)Printing orientation
(B)Make sure the flaps are folded.
3 Specify the settings in the printer driver.
(1)Select Envelope in Media Type.
(2)Select the size for envelopes.
In Windows ®, select DL Env. or Comm. Env. #10 in Page Size.
In Macintosh, select DL Envelope or #10 Envelope in Paper Size.
(3)Select Landscape in Orientation.
,qt Important
Be sure to set the printer driver setting properly. If you do not, the address will be printed in the wrong direction.
Note
For details on printer driver settings, see "Printing with Windows" on page 29 or "Printing with Macintosh" on page 30.