Cleaning the machine Use a damp cloth to clean the machine. Never use |
| ||
flammable solvents such as atcohol, benzene or thinners. |
| ||
Ifflammable | solvents come in contact with electrical |
| |
components | inside the machine, | it could cause a fire or | ...... |
etectric shock. |
| ||
Always unplug the machine from the power outlet before cleaning the machine.
If you accidentally switch the machine on while cleaning it, you could injure yourself or damage
| the machine. |
|
Maintaining the | Do not attempt to disassemble or modify the machine. There are no user serviceable | parts inside |
machine | the machine. |
|
| The machine contains | |
| described in this guide. |
|
Working around the | Do not use highly flammable sprays near the machine. |
|
machine | This could cause a fire or electric shock if the spray comes into contact with electrical | components |
| inside the machine. |
|
Caution
You may cause injury or damage the machine if you ignore any of these safety precautions.
Choosing a location Do not install the machine in a location that is unstable or subject to excessive vibration.
Do not install the machine in locations that are very humid or dusty, in direct sunlight, outdoors, or close to a heating source.
To avoid the risk of fire or electric shocks, install the machine in a location with an ambient
temperature range of 5°C to 35°C (41 °F to 95°F) and humidity of 10% to 90% (condensation free).
Do not place the machine on a thick rug or carpet.
Do not place the machine with its back attached to the wall.
Power supplyEnsure that the area around the power outlet is kept clear at all times so you can easily unplug the power cord if necessary.
Never remove the plug by pulling on the cord.
Do not use an extension lead/cord.
Safety Precautions | 79 |