Canon MP470 quick start LCD Cannot Be Seen At All, An Unintended Language Is Displayed on the LCD

Page 62

The ink absorber is almost full. Press [OK] to continue printing. Contact the service center.

Incompatible device detected. Remove the device,

An unsupported USB hub is connected. Remove the hub.

Error code

The machine has a built-in ink absorber to hold the ink used during Print Head Cleaning, for example.

This error message indicates that the ink absorber is nearly full.

Press the OK button to cancel the error so you can continue printing.

However, because printing is disabled once the ink absorber becomes completely full and until the ink absorber is replaced, you are recommended to contact your Canon service representative as early as possible. (You wilt need to replace a particular part of the machine.)

•A communication time out occurs if an operation takes too long or if it takes

too much time to send data. This may cancel printing. In such cases, disconnect and reconnect the USB cable.

When printing from a PictBridge compliant device, depending on the model or brand of your device, you may have to select a PictBridge compliant print mode on the device before connecting it to the machine. You may also have to turn on your device or select Play mode manually after connecting the device to the machine. Perform necessary operations before connecting your device referring to its instruction manual.

If the error is still not resolved, check if you can print another photograph.

•Check your device connected to the machine. Only PictBridge compliant devices or the optional Bluetooth Unit BU-20 can be connected to the machine for direct printing.

If a PictBridge compliant device is connected via a USB hub, remove the hub and connect it directly to the machine.

•Make sure that the protective material is removed from the FINE Cartridge Holder, then turn the machine off and back on again. If the problem is not resolved, contact your Canon Service representative.

•Turn off the machine, and unplug the power cord of the machine from the power supply. After a while, plug the power cord of the machine back in, and then turn on the machine. If the same error occurs, contact your Canon service representative.

LCD Cannot Be Seen At All

The machine is not powered on or the LCD is in the screen-saver mode.

•If the Power lamp is off

The machine is not powered on. Connect the power cord and press the ON/ OFF button. The machine will power on and the LCD will display a message.

•If the Power lamp is lit

The LCD may be in the screen-saver mode. On the Operation Panel, press a button other than the ON/OFF button.

An Unintended Language Is Displayed on the LCD

The language you want to be displayed

Select the language you want to be displayed according to the following

is not selected.

_rocedure.

 

 

 

 

 

 

 

(1}Press

the COPY button. Wait for about 5 seconds,

and then press the Menu

 

button.

 

 

 

 

 

 

 

(2}Press

the

_

button

twice to select /_i,

then

press

the OK button.

 

(3)Press

the

1_ button

once to select _,

then

press

the OK button.

 

(4}Press

the v

button

three times, then press the OK

button.

If the Bluetooth Unit is connected, press the v button five times, then press the OK button.

(5}Use the A or v button to select the language for the LCD, then press the OK button.

58Troubleshooting

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Quick Start Guide Help Us Help You Better Getting Help from CanonCustomer Technical Support Sequence Quick Start Guide MP470seriesDisclaimer Table of Contents Stop/Reset button Before Using the Machine2Before Using the Machine Alarm lampBefore Using the Machine Basic Operation on the Menu Screen How to Navigate Menus on the LCD4Before Using the Machine Memory card mode Copy modeScan mode Maintenance/settingsBasic Operation on the Settings Screen 6Before Using the MachineFor details on the setting Items Turning the Machine On and Off 8Before Using the MachineAbout the Power Plug Turning on the MachineOriginal Document Requirements Screen-saver ModeHandling the Original Document Loading Original DocumentsInches / 1 mm To scan photographsBefore Using the Machine Photo Quality Media Suited For Business Using Specialty MediaLoading Printing Paper DocumentsPaper Handling Recommended Paper and Requirements Media Types You Cannot Use Flatten the four corners of the paper before loading it When Printing on Plain PaperLoading Paper Prepare to load paper Load PaperLoading Envelopes Use either European DL or US Comm. Env. #10-sized envelopeLoad the envelopes Qt ImportantLoading Small-Sized Paper Load the paperMaking Copies Setting ItemsCopying CopyingCopying21 Using Useful Copy Functions Printing from a Memory Card Printing from a Memory CardMemory Cards Supported by This Machine Na!ntPrintable Image Data Inserting the Memory CardPrepare for printing Removing the Memory CardPrinting Photographs Display photo Start printingSetting Items OFFUsing Useful Printing Functions Multiselect printPrinting by Using the Photo Index Sheet Printing with Windows Specify the required settings and click OKPrinting from Your Computer Printing from Your ComputerMake sure that your machines name is Selected in Format for Media Pop-up menu Specify the required settingsPrinting with Macintosh Select Size of the loaded paperScanning Images Scanning MethodsConnectable Devices Printing Photographs Directly from a Compliant DevicePrinting Photographs Directly from a Compliant Device Printable Image Data FormatConnect the PictBridge compliant device to the machine Start printing from your PictBridge compliant devicePaper Size and Paper Type Settings About PictBridge Print SettingsSettings on a PictBridge Compliant Device Image Optimize Setting Layout SettingDate/File No. Print Setting Trimming SettingSpecify the Setting Setting on the MachineDisplaying the PictBridge Settings Screen For Routine Maintenance Routine MaintenanceWhen Printing Becomes Faint or Colors Are Incorrect Before performing maintenancePrinting the Nozzle Check Pattern Print the nozzle check patternIf There Are No Missing Lines and No White Streaks Examining the Nozzle Check PatternCheck the nozzle check pattern you printed If Lines Are Missing or White Streaks Are Present Print Head Cleaning Start Print Head CleaningConfirm the condition of the Print Head Print Head Deep CleaningStart Print Head Deep Cleaning Aligning the Print Head Print the print head alignment patternAdjust the print head position Replacing a Fine Cartridge Getting the Ink Status InformationReplacing Fine Cartridges Handling Fine CartridgesRemove the empty Fine Cartridge Push down the Fine Cartridge Prepare the replacement Fine cartridge Install the Fine CartridgeRoutine Maintenance Keeping the Best Printing Results When You Turn Off the MachineWhen You Are Not Using the Machine for a Long Time Cleaning the Platen Glass and Document Cover Cleaning Your MachineCleaning the Exterior of the Machine Cleaning the Paper Feed Roller Roller cleaning Maintenance/settings screen is displayed Cleaning the Inside of the Machine Bottom plate cleaningPerform bottom plate cleaning Cleaning the Protrusions Inside the Machine Troubleshooting TroubleshootingAn Error Message Is Displayed on the LCD Troubleshooting57LCD Cannot Be Seen At All An Unintended Language Is Displayed on the LCD1Click Start then Computer Cannot Install the MP DriversTroubleshooting59 Cannot Connect to Computer Properly This device can perform faster Message Is DisplayedType of the loaded paper? Troubleshooting61Print Results Not Satisfactory Colors Are Unclear Printed Paper Curls or Has Ink Blots Troubleshooting63White Streaks Printed Surface Is Scratched/Paper Is SmudgedReduce the Intensity setting. Then try printing again Printing Does Not Start Print Result Not Satisfactory When CopyingTroubleshooting65 Colors Are Uneven or StreakedDoes Not Feed Properly Machine is not readyTroubleshooting67 Paper JamsError Message Appears on the Computer Screen Writing Error/Output Error/Communication ErrorTroubleshooting69 Error No Is DisplayedError No /1710 Is Displayed Error Message Appears on a PictBridge Compliant DeviceCannot Print Properly from a Photo Index Sheet Troubleshooting71Cannot Remove a Memory Card Printing Does Not StartOther Scanning Troubles Scanning ProblemsScanGear Wont Start Appendix How to Use the Documentation ProvidedRead this guide when starting to use the machine Appendix73Reading the On-screen Manuals AppendixSpecifications Appendix75Operating System Processor PapertypeLayout BrowserAppendix77 Browser Windows Html Help ViewerSafety Precautions Safety PrecautionsSafety Precautions Machine Legal Limitations on Use of Your Product and Use of Images Regulatory Information Canon U.S.A., INC. Limited Warranty --- USA OnlyUsers in the U.S.A FCC Notice U.S.A. Only For 120V, 60Hz modelSafety Precautions Authorized Service Facility Carry-In /Mail-In Service Canon U.S.A., Inc One Canon Plaza Lake Success, NY USAIndex IndexCanon Specialty Papers Ordering InformationDescription Order # QT5-1007-V01 Canon INC
Top Page Image Contents