Canon 2010F Place your original, Set the desired copy mode on the Copy Basic Features screen

Page 15

1

Introduction to Copying

2 Place your original.

You can place your original both vertically and horizontally in the feeder or on the platen glass.

For instructions on placing your original, see “Placing Originals,” on p. 1-10.

Cou

 

Checknter

 

Display C

 

ontrast

 

Collate

 

Special

 

Features

COPY

 

 

FAX

NOTE

LTR originals can be placed either vertically or horizontally. However, the scanning speed for horizontally placed originals is somewhat slower than for vertically placed originals. You can place originals horizontally when scanning with a Preset Zoom, such as when enlarging LTR to 11" x 17" .

Horizontally placed LTR originals are referred to as LTR .

11" x 17" and LGL originals must be placed horizontally.

If AUTO SORT is set to ‘01 ON’ from the Additional Functions menu, the Collate mode is automatically set when the original is placed in the feeder. (See “Auto Sort,” on p. 4-8.)

3 Set the desired copy mode on the Copy Basic Features screen.

NOTE

On the Copy Basic Features screen, you can select the copy ratio, paper size, and copy exposure and image quality settings.

1-6Flow of Copy Operations

Image 15
Contents Copying Guide ImageRUNNER 2010F Copying Guide Manuals for the Machine Appendix How This Manual Is OrganizedContents Special Copying Features Customizing SettingsAppendix How to Use This Manual Symbols Used in This ManualKeys Used in This Manual Vii Illustrations Used in This ManualDisclaimers Legal NoticesTrademarks CopyrightIntroduction to Copying Copy Basic Features Screen Special Features ScreenOverview of the imageRUNNER 2010F Additional Functions Menu Press Copy Flow of Copy OperationsIf the message Insert a Control Card appears If the message Enter Department ID and Password appearsPlace your original Set the desired copy mode on the Copy Basic Features screenSet the desired copy modes on the Special Features screen Enter the copy quantityPress Start If you want to cancel a copy job in the standby mode If you want to stop a copy jobIf you want to interrupt a copy job If you have set Department ID Management, press ID Placing Originals Platen GlassFeeder Platen Glass Vertical Placement Horizontal Placement FeederVertical Placement OrientationPlaten Glass Lift up the feederPlace your original face down Gently lower the feeder Feeder ADF-J1 Original Output Tray Adjust the slide guides to fit the size of your originalsIf only one copy job is being processed Canceling a Copy JobUsing the Stop Key Press StopPress F3 YES Using the System Monitor ScreenYou cannot select multiple jobs and cancel them all at once Press MonitorCopy lights Reserved CopyingReserving Copy Jobs While Printing Place your original, and set the desired copy modesWhen scanning is complete, remove the original from Machine Press Interrupt Interrupt ModeOnce the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Copy Quantity Specifying the Required Number of CopiesChanging the Copy Quantity Copy Quantity Automatic Paper Selection Paper SelectionMake sure that Auto Paper is selected press OK Manual Paper SelectionIf you want to use the stack bypass Press F3 or F4 to select the desired paper sizePress OK Copy Exposure and Image Quality Automatic Text Mode Text/Photo ModeCopy Exposure Manual Image Quality ManualPress F1 Light or F3 Dark to adjust the exposure Copy Exposure ManualPress Light or Image Quality Manual Text ModeText/Photo Mode Photo ModeCopy Exposure and Image Quality Automatic Press F2 Auto Exposur OK To cancel the automatic exposure control, pressAuto Zoom Preset ZoomChanging the Copy Zoom Ratio Zoom by PercentagePreset Zoom ReduceEnlarge Each time you press Press F3 Reduce or F4 Enlarge to select a presetZoom by Percentage Reduction or enlargement ratio press OKCorrect value Set the copy ratio using the numeric keys press OK200%. Enter a value within the setting range Auto ZoomPress F2 Auto Zoom OK Press F1 Copy RatioOptional Units Collate Rotate Offset Staple*1 Collating CopiesIf the Collate Mode Is Set If the Rotate Mode Is SetOriginals Set Result Place your originals press Collate If the Offset Mode Is SetIf the Staple Mode Is Set Order CollateIf you want to set the Offset mode If you want to set the Rotate modeNumber of Copies, on p Order StapleAppears LightsPress Start 24Collating Copies Special Copying Features Features Two-Page SeparationPlace your original on the platen glass press Special Original Size setting menu appears Direction that the book opens press OKSpecial Press F4 Orignal Size to select the paper size press OK Top Margin Bottom Margin Selected Selected Margin ModePlace your original press Special Features Original Left Margin Selected Right Margin6Margin Mode Press YES or Original Frame Erase Frame EraseHole Punch Erase Book Frame Erase Mode Original Selected Copy Not SelectedOriginal Frame Erase Book Frame ErasePress F4 Orignal Size to select the size of the original Book Frame Erase Opened press OK Press F3 Frame Erase Press F3 Book FR ERS OKClear to clear the value Default setting is ‘10 mm’Press F3 or F4 + to set the desired book frame erase Width 3 mm to 50 mm for the center line press OKPress F3 Frame Erase Press F4 HOLE/P Erase OK Hole Punch EraseEach time you press 16Frame Erase Image Combination Original Vertical Placement CopyCopying Special Place your originals press Special FeaturesBecomes highlighted Copy Layout setting menu appears Paper size press OK If you selected 2 on 1 Comb in stepIf you selected 4 on 1 in step Press Start Place your originals in the feeder press the Shortcut key To 4 where you registered the Different Size OriginalsDifferent Size Originals ModeSet the desired copy modes 24Different Size Originals Customizing Settings Available Settings Applicable Copy Settings TableChanging the Current Standard Settings Image Quality and Copy ExposurePress Additional Functions Press Reset to return to the Copy Basic Features screen Press F3 or F4 to highlight 01 STD Image QualEXP press OK Press F3 or F4 to highlight 02 STD Zoom Ratio Press OK Zoom RatioPress F3 or F4 to highlight 03 Standard Copy QTY press OK Copy QuantityFrame Erase Width Press F3 or F4 to highlight 04 Frame EraseWidth press OK Auto Sort Press F2 or F3 + to set the desired frame erase widthMm to 20 mm press OK Sort Rotate Press F3 or F4 to highlight 05 Auto Sort Press OKPress F3 or F4 to select 01 on or 02 OFF Press OK Press F3 or F4 to highlight 06 Sort Rotate press OK Original Copy Dull Is Set Dull Is Not Set SharpnessDull SharpPress F3 or F4 to highlight 08 Sharpness press OK Prescan Press F3 or F4 to highlight 09 Prescan press F4OKIf you want to use the prescan function, select 01 on 14Changing the Current Standard Settings Assigning Functions Using Shortcut KeysPress F3 or F4 to select a shortcut key press OK Press F3 or F4 to highlight 07 Shortcut KEY SET press OKMaking Copies That contains the copy mode you want to setIf necessary, specify the settings for each mode Setting Applicable18Using Shortcut Keys Appendix Function to Be Set Combination of Functions ChartCombination available Combination unavailable 4Combination of Functions Chart Originals Size Different Numerics IndexIndex Making Copies Canon Italia S.p.A Canon Deutschland GmbH
Related manuals
Manual 382 pages 14.98 Kb