Canon 2010F If you want to stop a copy job, If you want to cancel a copy job in the standby mode

Page 17

1

Introduction to Copying

Stop

F3

Stop

F2

F3

F4

Interrupt

NOTE

If there is a current job, the machine scans the original, and waits to print it. Printing starts when the current job is complete.

7 If you want to stop, interrupt, or copy another original during a copy job, follow the instruction below.

If you want to stop a copy job:

Press [Stop].

Press [F3] (YES).

If you want to cancel a copy job in the standby mode:

Press [Stop].

Press [F2] () or [F3] () to select the copy job you want to cancel press [F4] (CANCEL).

NOTE

After pressing (Stop), several copies may continue to print out.

You can also cancel a copy job from the System Monitor screen. (See “Using the System Monitor Screen,” on p. 1-17.)

If you want to interrupt a copy job:

To interrupt a copy job when you need to make priority copies, press [Interrupt]. For instructions on interrupting a copy job, see “Interrupt Mode,” on p. 1-20.

The message <ABLE TO PERFORM INTERRUPT JOB> appears on the LCD display.

1-8Flow of Copy Operations

Image 17
Contents Copying Guide ImageRUNNER 2010F Copying Guide Manuals for the Machine Appendix How This Manual Is OrganizedContents Appendix Special Copying FeaturesCustomizing Settings Keys Used in This Manual How to Use This ManualSymbols Used in This Manual Vii Illustrations Used in This ManualTrademarks Legal NoticesCopyright DisclaimersIntroduction to Copying Overview of the imageRUNNER 2010F Copy Basic Features ScreenSpecial Features Screen Additional Functions Menu Press Copy Flow of Copy OperationsIf the message Insert a Control Card appears If the message Enter Department ID and Password appearsPlace your original Set the desired copy mode on the Copy Basic Features screenPress Start Set the desired copy modes on the Special Features screenEnter the copy quantity If you want to interrupt a copy job If you want to cancel a copy job in the standby modeIf you want to stop a copy job If you have set Department ID Management, press ID Feeder Placing OriginalsPlaten Glass Vertical Placement Vertical Placement Horizontal Placement FeederOrientation Platen GlassPlace your original face down Platen GlassLift up the feeder Gently lower the feeder Feeder ADF-J1 Original Output Tray Adjust the slide guides to fit the size of your originalsUsing the Stop Key Canceling a Copy JobPress Stop If only one copy job is being processedYou cannot select multiple jobs and cancel them all at once Using the System Monitor ScreenPress Monitor Press F3 YESReserving Copy Jobs While Printing Reserved CopyingPlace your original, and set the desired copy modes Copy lightsWhen scanning is complete, remove the original from Machine Press Interrupt Interrupt ModeOnce the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Changing the Copy Quantity Copy QuantitySpecifying the Required Number of Copies Copy Quantity Automatic Paper Selection Paper SelectionMake sure that Auto Paper is selected press OK Manual Paper SelectionIf you want to use the stack bypass Press F3 or F4 to select the desired paper sizePress OK Copy Exposure Manual Text Mode Text/Photo ModeImage Quality Manual Copy Exposure and Image Quality AutomaticPress Light or Press F1 Light or F3 Dark to adjust the exposureCopy Exposure Manual Text/Photo Mode Text ModePhoto Mode Image Quality ManualCopy Exposure and Image Quality Automatic Press F2 Auto Exposur OK To cancel the automatic exposure control, pressChanging the Copy Zoom Ratio Preset ZoomZoom by Percentage Auto ZoomEnlarge Preset ZoomReduce Zoom by Percentage Press F3 Reduce or F4 Enlarge to select a presetReduction or enlargement ratio press OK Each time you press200%. Enter a value within the setting range Set the copy ratio using the numeric keys press OKAuto Zoom Correct valuePress F2 Auto Zoom OK Press F1 Copy RatioOptional Units Collate Rotate Offset Staple*1 Collating CopiesOriginals Set Result If the Collate Mode Is SetIf the Rotate Mode Is Set If the Staple Mode Is Set If the Offset Mode Is SetOrder Collate Place your originals press CollateIf you want to set the Offset mode If you want to set the Rotate modeAppears Order StapleLights Number of Copies, on pPress Start 24Collating Copies Special Copying Features Place your original on the platen glass press Special FeaturesTwo-Page Separation Special Original Size setting menu appearsDirection that the book opens press OK Press F4 Orignal Size to select the paper size press OK Place your original press Special Features Margin ModeOriginal Left Margin Selected Right Margin Top Margin Bottom Margin Selected Selected6Margin Mode Press YES or Original Frame Erase Frame EraseOriginal Frame Erase Book Frame Erase Mode Original Selected Copy Not SelectedBook Frame Erase Hole Punch ErasePress F4 Orignal Size to select the size of the original Book Frame Erase Opened press OK Press F3 Frame Erase Press F3 Book FR ERS OKPress F3 or F4 + to set the desired book frame erase Default setting is ‘10 mm’Width 3 mm to 50 mm for the center line press OK Clear to clear the valuePress F3 Frame Erase Press F4 HOLE/P Erase OK Hole Punch EraseEach time you press 16Frame Erase Image Combination Original Vertical Placement CopyCopying Special Place your originals press Special FeaturesBecomes highlighted Copy Layout setting menu appears If you selected 4 on 1 in step Paper size press OKIf you selected 2 on 1 Comb in step Press Start Different Size Originals To 4 where you registered the Different Size OriginalsMode Place your originals in the feeder press the Shortcut keySet the desired copy modes 24Different Size Originals Customizing Settings Available Settings Applicable Copy Settings TablePress Additional Functions Changing the Current Standard SettingsImage Quality and Copy Exposure EXP press OK Press Reset to return to the Copy Basic Features screenPress F3 or F4 to highlight 01 STD Image Qual Press F3 or F4 to highlight 02 STD Zoom Ratio Press OK Zoom RatioPress F3 or F4 to highlight 03 Standard Copy QTY press OK Copy QuantityWidth press OK Frame Erase WidthPress F3 or F4 to highlight 04 Frame Erase Mm to 20 mm press OK Auto SortPress F2 or F3 + to set the desired frame erase width Press F3 or F4 to select 01 on or 02 OFF Press OK Sort RotatePress F3 or F4 to highlight 05 Auto Sort Press OK Press F3 or F4 to highlight 06 Sort Rotate press OK Dull SharpnessSharp Original Copy Dull Is Set Dull Is Not SetPress F3 or F4 to highlight 08 Sharpness press OK If you want to use the prescan function, select 01 on PrescanPress F3 or F4 to highlight 09 Prescan press F4OK 14Changing the Current Standard Settings Assigning Functions Using Shortcut KeysPress F3 or F4 to select a shortcut key press OK Press F3 or F4 to highlight 07 Shortcut KEY SET press OKIf necessary, specify the settings for each mode That contains the copy mode you want to setSetting Applicable Making Copies18Using Shortcut Keys Appendix Function to Be Set Combination of Functions ChartCombination available Combination unavailable 4Combination of Functions Chart Originals Size Different Numerics IndexIndex Making Copies Canon Italia S.p.A Canon Deutschland GmbH
Related manuals
Manual 382 pages 14.98 Kb