Canon 2010F manual Gently lower the feeder

Page 22

If you are enlarging an STMT or LTR original to 11" x 17" or LGL paper, place the original horizontally on the platen glass, and align it with the STMT or LTR marks.

3 Gently lower the feeder.

CAUTION

Close the feeder gently, to avoid catching your hand, as this may result in personal injury.

Do not press down hard on the feeder when using the platen glass to make copies of thick books. Doing so may damage the platen glass and result in personal injury.

IMPORTANT

If you are placing originals on the platen glass, the size of the original is detected after the feeder has been lowered. Be sure to lower the feeder before copying.

STMT originals and postcards cannot be detected. Follow the instructions on the display and specify the original size or select the paper size.

NOTE

Remove the original from the platen glass when scanning is complete.

1

Introduction to Copying

Placing Originals

1-13

Image 22
Contents Copying Guide ImageRUNNER 2010F Copying Guide Manuals for the Machine How This Manual Is Organized AppendixContents Customizing Settings Special Copying FeaturesAppendix Symbols Used in This Manual How to Use This ManualKeys Used in This Manual Illustrations Used in This Manual ViiCopyright Legal NoticesTrademarks DisclaimersIntroduction to Copying Special Features Screen Copy Basic Features ScreenOverview of the imageRUNNER 2010F Additional Functions Menu Flow of Copy Operations Press CopyIf the message Enter Department ID and Password appears If the message Insert a Control Card appearsSet the desired copy mode on the Copy Basic Features screen Place your originalEnter the copy quantity Set the desired copy modes on the Special Features screenPress Start If you want to stop a copy job If you want to cancel a copy job in the standby modeIf you want to interrupt a copy job If you have set Department ID Management, press ID Platen Glass Placing OriginalsFeeder Orientation Vertical Placement Horizontal Placement FeederVertical Placement Platen GlassLift up the feeder Platen GlassPlace your original face down Gently lower the feeder Feeder ADF-J1 Adjust the slide guides to fit the size of your originals Original Output TrayPress Stop Canceling a Copy JobUsing the Stop Key If only one copy job is being processedPress Monitor Using the System Monitor ScreenYou cannot select multiple jobs and cancel them all at once Press F3 YESPlace your original, and set the desired copy modes Reserved CopyingReserving Copy Jobs While Printing Copy lightsWhen scanning is complete, remove the original from Machine Interrupt Mode Press InterruptOnce the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Specifying the Required Number of Copies Copy QuantityChanging the Copy Quantity Copy Quantity Paper Selection Automatic Paper SelectionManual Paper Selection Make sure that Auto Paper is selected press OKPress F3 or F4 to select the desired paper size If you want to use the stack bypassPress OK Image Quality Manual Text Mode Text/Photo ModeCopy Exposure Manual Copy Exposure and Image Quality AutomaticCopy Exposure Manual Press F1 Light or F3 Dark to adjust the exposurePress Light or Photo Mode Text ModeText/Photo Mode Image Quality ManualCopy Exposure and Image Quality Automatic To cancel the automatic exposure control, press Press F2 Auto Exposur OKZoom by Percentage Preset ZoomChanging the Copy Zoom Ratio Auto ZoomReduce Preset ZoomEnlarge Reduction or enlargement ratio press OK Press F3 Reduce or F4 Enlarge to select a presetZoom by Percentage Each time you pressAuto Zoom Set the copy ratio using the numeric keys press OK200%. Enter a value within the setting range Correct valuePress F1 Copy Ratio Press F2 Auto Zoom OKCollating Copies Optional Units Collate Rotate Offset Staple*1If the Rotate Mode Is Set If the Collate Mode Is SetOriginals Set Result Order Collate If the Offset Mode Is SetIf the Staple Mode Is Set Place your originals press CollateIf you want to set the Rotate mode If you want to set the Offset modeLights Order StapleAppears Number of Copies, on pPress Start 24Collating Copies Special Copying Features Two-Page Separation FeaturesPlace your original on the platen glass press Special Direction that the book opens press OK Original Size setting menu appearsSpecial Press F4 Orignal Size to select the paper size press OK Original Left Margin Selected Right Margin Margin ModePlace your original press Special Features Top Margin Bottom Margin Selected Selected6Margin Mode Press YES or Frame Erase Original Frame EraseBook Frame Erase Book Frame Erase Mode Original Selected Copy Not SelectedOriginal Frame Erase Hole Punch ErasePress F4 Orignal Size to select the size of the original Book Frame Erase Press F3 Frame Erase Press F3 Book FR ERS OK Opened press OKWidth 3 mm to 50 mm for the center line press OK Default setting is ‘10 mm’Press F3 or F4 + to set the desired book frame erase Clear to clear the valueHole Punch Erase Press F3 Frame Erase Press F4 HOLE/P Erase OKEach time you press 16Frame Erase Original Vertical Placement Copy Image CombinationPlace your originals press Special Features Copying SpecialBecomes highlighted Copy Layout setting menu appears If you selected 2 on 1 Comb in step Paper size press OKIf you selected 4 on 1 in step Press Start Mode To 4 where you registered the Different Size OriginalsDifferent Size Originals Place your originals in the feeder press the Shortcut keySet the desired copy modes 24Different Size Originals Customizing Settings Copy Settings Table Available Settings ApplicableImage Quality and Copy Exposure Changing the Current Standard SettingsPress Additional Functions Press F3 or F4 to highlight 01 STD Image Qual Press Reset to return to the Copy Basic Features screenEXP press OK Zoom Ratio Press F3 or F4 to highlight 02 STD Zoom Ratio Press OKCopy Quantity Press F3 or F4 to highlight 03 Standard Copy QTY press OKPress F3 or F4 to highlight 04 Frame Erase Frame Erase WidthWidth press OK Press F2 or F3 + to set the desired frame erase width Auto SortMm to 20 mm press OK Press F3 or F4 to highlight 05 Auto Sort Press OK Sort RotatePress F3 or F4 to select 01 on or 02 OFF Press OK Press F3 or F4 to highlight 06 Sort Rotate press OK Sharp SharpnessDull Original Copy Dull Is Set Dull Is Not SetPress F3 or F4 to highlight 08 Sharpness press OK Press F3 or F4 to highlight 09 Prescan press F4OK PrescanIf you want to use the prescan function, select 01 on 14Changing the Current Standard Settings Using Shortcut Keys Assigning FunctionsPress F3 or F4 to highlight 07 Shortcut KEY SET press OK Press F3 or F4 to select a shortcut key press OKSetting Applicable That contains the copy mode you want to setIf necessary, specify the settings for each mode Making Copies18Using Shortcut Keys Appendix Combination of Functions Chart Function to Be SetCombination available Combination unavailable 4Combination of Functions Chart Originals Size Different Index NumericsIndex Making Copies Canon Deutschland GmbH Canon Italia S.p.A
Related manuals
Manual 382 pages 14.98 Kb