Canon 2010F manual Reserved Copying, Reserving Copy Jobs While Printing, Copy lights

Page 27

1

Introduction to Copying

Reserved Copying

You can select copy settings and scan originals even if the machine is currently printing. Your scanned documents are processed after the current job is complete.

IMPORTANT

The machine cannot scan originals while it is warming up, at power ON, or after clearing a paper jam.

NOTE

You can set different copy modes for each job.

Reserving Copy Jobs While Printing

You can scan other originals, and set different copy modes while the machine is printing a previous job. The machine begins printing the reserved copy job after the current job completes. This helps you to handle multiple copy jobs more efﬁciently.

COPY	1 Press [COPY].
	COPY lights.

2 Place your original, and set the desired copy modes.

Start	3 Press [Start].
	3 Press [Start].
	Scanning starts.
	NOTE
	To cancel a reserved copy job, press (Stop) ➞ press			F2	(▼) or	F3
	To cancel a reserved copy job, press (Stop) ➞ press				(▼) or
	(▲) to select the reserved copy job ➞ press	F4	(CANCEL).
	(▲) to select the reserved copy job ➞ press		(CANCEL).

1-18Reserved Copying

Image 27

Contents Copying Guide ImageRUNNER 2010F Copying Guide Manuals for the Machine Appendix How This Manual Is OrganizedContents Special Copying Features Customizing SettingsAppendix How to Use This Manual Symbols Used in This ManualKeys Used in This Manual Vii Illustrations Used in This ManualDisclaimers Legal NoticesTrademarks CopyrightIntroduction to Copying Copy Basic Features Screen Special Features ScreenOverview of the imageRUNNER 2010F Additional Functions Menu Press Copy Flow of Copy OperationsIf the message Insert a Control Card appears If the message Enter Department ID and Password appearsPlace your original Set the desired copy mode on the Copy Basic Features screenSet the desired copy modes on the Special Features screen Enter the copy quantityPress Start If you want to cancel a copy job in the standby mode If you want to stop a copy jobIf you want to interrupt a copy job If you have set Department ID Management, press ID Placing Originals Platen GlassFeeder Platen Glass Vertical Placement Horizontal Placement FeederVertical Placement OrientationPlaten Glass Lift up the feederPlace your original face down Gently lower the feeder Feeder ADF-J1 Original Output Tray Adjust the slide guides to ﬁt the size of your originalsIf only one copy job is being processed Canceling a Copy JobUsing the Stop Key Press StopPress F3 YES Using the System Monitor ScreenYou cannot select multiple jobs and cancel them all at once Press MonitorCopy lights Reserved CopyingReserving Copy Jobs While Printing Place your original, and set the desired copy modesWhen scanning is complete, remove the original from Machine Press Interrupt Interrupt ModeOnce the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Copy Quantity Specifying the Required Number of CopiesChanging the Copy Quantity Copy Quantity Automatic Paper Selection Paper SelectionMake sure that Auto Paper is selected press OK Manual Paper SelectionIf you want to use the stack bypass Press F3 or F4 to select the desired paper sizePress OK Copy Exposure and Image Quality Automatic Text Mode Text/Photo ModeCopy Exposure Manual Image Quality ManualPress F1 Light or F3 Dark to adjust the exposure Copy Exposure ManualPress Light or Image Quality Manual Text ModeText/Photo Mode Photo ModeCopy Exposure and Image Quality Automatic Press F2 Auto Exposur OK To cancel the automatic exposure control, pressAuto Zoom Preset ZoomChanging the Copy Zoom Ratio Zoom by PercentagePreset Zoom ReduceEnlarge Each time you press Press F3 Reduce or F4 Enlarge to select a presetZoom by Percentage Reduction or enlargement ratio press OKCorrect value Set the copy ratio using the numeric keys press OK200%. Enter a value within the setting range Auto ZoomPress F2 Auto Zoom OK Press F1 Copy RatioOptional Units Collate Rotate Offset Staple*1 Collating CopiesIf the Collate Mode Is Set If the Rotate Mode Is SetOriginals Set Result Place your originals press Collate If the Offset Mode Is SetIf the Staple Mode Is Set Order CollateIf you want to set the Offset mode If you want to set the Rotate modeNumber of Copies, on p Order StapleAppears LightsPress Start 24Collating Copies Special Copying Features Features Two-Page SeparationPlace your original on the platen glass press Special Original Size setting menu appears Direction that the book opens press OKSpecial Press F4 Orignal Size to select the paper size press OK Top Margin Bottom Margin Selected Selected Margin ModePlace your original press Special Features Original Left Margin Selected Right Margin6Margin Mode Press YES or Original Frame Erase Frame EraseHole Punch Erase Book Frame Erase Mode Original Selected Copy Not SelectedOriginal Frame Erase Book Frame ErasePress F4 Orignal Size to select the size of the original Book Frame Erase Opened press OK Press F3 Frame Erase Press F3 Book FR ERS OKClear to clear the value Default setting is ‘10 mm’Press F3 or F4 + to set the desired book frame erase Width 3 mm to 50 mm for the center line press OKPress F3 Frame Erase Press F4 HOLE/P Erase OK Hole Punch EraseEach time you press 16Frame Erase Image Combination Original Vertical Placement CopyCopying Special Place your originals press Special FeaturesBecomes highlighted Copy Layout setting menu appears Paper size press OK If you selected 2 on 1 Comb in stepIf you selected 4 on 1 in step Press Start Place your originals in the feeder press the Shortcut key To 4 where you registered the Different Size OriginalsDifferent Size Originals ModeSet the desired copy modes 24Different Size Originals Customizing Settings Available Settings Applicable Copy Settings TableChanging the Current Standard Settings Image Quality and Copy ExposurePress Additional Functions Press Reset to return to the Copy Basic Features screen Press F3 or F4 to highlight 01 STD Image QualEXP press OK Press F3 or F4 to highlight 02 STD Zoom Ratio Press OK Zoom RatioPress F3 or F4 to highlight 03 Standard Copy QTY press OK Copy QuantityFrame Erase Width Press F3 or F4 to highlight 04 Frame EraseWidth press OK Auto Sort Press F2 or F3 + to set the desired frame erase widthMm to 20 mm press OK Sort Rotate Press F3 or F4 to highlight 05 Auto Sort Press OKPress F3 or F4 to select 01 on or 02 OFF Press OK Press F3 or F4 to highlight 06 Sort Rotate press OK Original Copy Dull Is Set Dull Is Not Set SharpnessDull SharpPress F3 or F4 to highlight 08 Sharpness press OK Prescan Press F3 or F4 to highlight 09 Prescan press F4OKIf you want to use the prescan function, select 01 on 14Changing the Current Standard Settings Assigning Functions Using Shortcut KeysPress F3 or F4 to select a shortcut key press OK Press F3 or F4 to highlight 07 Shortcut KEY SET press OKMaking Copies That contains the copy mode you want to setIf necessary, specify the settings for each mode Setting Applicable18Using Shortcut Keys Appendix Function to Be Set Combination of Functions ChartCombination available Combination unavailable 4Combination of Functions Chart Originals Size Different Numerics IndexIndex Making Copies Canon Italia S.p.A Canon Deutschland GmbH

Related manuals

Manual 382 pages 14.98 Kb