Canon 2010F manual Auto Sort, Press F2 or F3 + to set the desired frame erase width

4

Customizing Settings

F2	3 Press [F2] (–) or [F3] (+) to set the desired frame erase width
F3	(01 mm to 20 mm) ➞ press [OK].
OK	You can also use the numeric keys to enter the standard frame erase width, and

C(Clear) to clear the value.

If you enter a value outside the setting range, an error tone sounds. Enter a value within the setting range.

The selected mode is set, and the display returns to the COPY SETTINGS menu.

Reset

4 Press [Reset] to return to the Copy Basic Features screen.

Auto Sort

This setting allows automatic selection of the Collate (Offset Collate) mode when the originals are placed in the feeder. This is helpful when making multiple copies, because you do not need to remember to select the Finishing mode.

NOTE

Additional Functions

F3

F4

OK

•If AUTO SORT in Copy Settings (from the Additional Functions menu) is set to ‘01 ON’ when the Finisher-L1 (optional) is attached, the Offset Collate mode is automatically set. However, if the Finisher is not attached, the Collate or Rotate mode is automatically set. (See “Collating Copies,” on p. 2-18.)

•The default setting is ‘01 ON’.

1Press [Additional Functions] ➞ press [F3] (▼) or [F4] (▲) to highlight <02 COPY SETTINGS> ➞ press [OK].

The COPY SETTINGS menu appears.

4-8Changing the Current Standard Settings