Canon 2010F manual Automatic Paper Selection

Page 35

2

Basic Copying Features

Paper Selection

This mode enables you to set the machine to automatically select the paper size, or to manually specify a paper size for a copy job.

NOTE

•If you are copying an original onto the same size paper at a copy ratio of 100%, the periphery of the original image may be cut slightly on the copy. For details on the size of the margin areas, see Chapter 9, “Appendix,” in the Reference Guide.

•For instructions on loading paper into the stack bypass, see Chapter 2, “Basic Operations,” in the Reference Guide.

Automatic Paper Selection

The machine automatically selects the copy paper.

IMPORTANT

•The Automatic Paper Selection mode can be used when copying on the following paper sizes: 11'' x 17'', LGL, LTR, and STMT.

•You cannot use the Automatic Paper Selection mode when copying the following types of originals. Copy these originals using the Manual Paper Selection mode.

-Non standard size originals

-Highly transparent originals, such as transparencies

-Originals with an extremely dark background

-Originals smaller than STMT

•If the machine is operating in the Automatic Paper Selection mode, you cannot use the Auto Zoom mode, or Image Combination mode.

NOTE

•The default setting is ‘AUTO PAPER’.

•You can set whether to activate or deactivate the Automatic Paper Selection for each paper drawer and the stack bypass. (See Chapter 4, “Selecting and Storing Settings,” in the Reference Guide.)

•You can use the stack bypass for the Automatic Paper Selection when:

-The paper has already been placed in the stack bypass

-The paper size is speciﬁed in 06 USE STACK BYPASS in the Common Settings menu

-The Automatic Paper Selection mode is set to ‘02 ON’ for the stack bypass in the DRAWER ELIGIBLTY menu (See Chapter 4, “Selecting and Storing Settings,” in the Reference Guide.)

2-4Paper Selection

Image 35

Contents Copying Guide ImageRUNNER 2010F Copying Guide Manuals for the Machine Appendix How This Manual Is OrganizedContents Appendix Special Copying FeaturesCustomizing Settings Keys Used in This Manual How to Use This ManualSymbols Used in This Manual Vii Illustrations Used in This ManualDisclaimers Legal NoticesTrademarks CopyrightIntroduction to Copying Overview of the imageRUNNER 2010F Copy Basic Features ScreenSpecial Features Screen Additional Functions Menu Press Copy Flow of Copy OperationsIf the message Insert a Control Card appears If the message Enter Department ID and Password appearsPlace your original Set the desired copy mode on the Copy Basic Features screenPress Start Set the desired copy modes on the Special Features screenEnter the copy quantity If you want to interrupt a copy job If you want to cancel a copy job in the standby modeIf you want to stop a copy job If you have set Department ID Management, press ID Feeder Placing OriginalsPlaten Glass Platen Glass Vertical Placement Horizontal Placement FeederVertical Placement OrientationPlace your original face down Platen GlassLift up the feeder Gently lower the feeder Feeder ADF-J1 Original Output Tray Adjust the slide guides to ﬁt the size of your originalsIf only one copy job is being processed Canceling a Copy JobUsing the Stop Key Press StopPress F3 YES Using the System Monitor ScreenYou cannot select multiple jobs and cancel them all at once Press MonitorCopy lights Reserved CopyingReserving Copy Jobs While Printing Place your original, and set the desired copy modesWhen scanning is complete, remove the original from Machine Press Interrupt Interrupt ModeOnce the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Changing the Copy Quantity Copy QuantitySpecifying the Required Number of Copies Copy Quantity Automatic Paper Selection Paper SelectionMake sure that Auto Paper is selected press OK Manual Paper SelectionIf you want to use the stack bypass Press F3 or F4 to select the desired paper sizePress OK Copy Exposure and Image Quality Automatic Text Mode Text/Photo ModeCopy Exposure Manual Image Quality ManualPress Light or Press F1 Light or F3 Dark to adjust the exposureCopy Exposure Manual Image Quality Manual Text ModeText/Photo Mode Photo ModeCopy Exposure and Image Quality Automatic Press F2 Auto Exposur OK To cancel the automatic exposure control, pressAuto Zoom Preset ZoomChanging the Copy Zoom Ratio Zoom by PercentageEnlarge Preset ZoomReduce Each time you press Press F3 Reduce or F4 Enlarge to select a presetZoom by Percentage Reduction or enlargement ratio press OKCorrect value Set the copy ratio using the numeric keys press OK200%. Enter a value within the setting range Auto ZoomPress F2 Auto Zoom OK Press F1 Copy RatioOptional Units Collate Rotate Offset Staple*1 Collating CopiesOriginals Set Result If the Collate Mode Is SetIf the Rotate Mode Is Set Place your originals press Collate If the Offset Mode Is SetIf the Staple Mode Is Set Order CollateIf you want to set the Offset mode If you want to set the Rotate modeNumber of Copies, on p Order StapleAppears LightsPress Start 24Collating Copies Special Copying Features Place your original on the platen glass press Special FeaturesTwo-Page Separation Special Original Size setting menu appearsDirection that the book opens press OK Press F4 Orignal Size to select the paper size press OK Top Margin Bottom Margin Selected Selected Margin ModePlace your original press Special Features Original Left Margin Selected Right Margin6Margin Mode Press YES or Original Frame Erase Frame EraseHole Punch Erase Book Frame Erase Mode Original Selected Copy Not SelectedOriginal Frame Erase Book Frame ErasePress F4 Orignal Size to select the size of the original Book Frame Erase Opened press OK Press F3 Frame Erase Press F3 Book FR ERS OKClear to clear the value Default setting is ‘10 mm’Press F3 or F4 + to set the desired book frame erase Width 3 mm to 50 mm for the center line press OKPress F3 Frame Erase Press F4 HOLE/P Erase OK Hole Punch EraseEach time you press 16Frame Erase Image Combination Original Vertical Placement CopyCopying Special Place your originals press Special FeaturesBecomes highlighted Copy Layout setting menu appears If you selected 4 on 1 in step Paper size press OKIf you selected 2 on 1 Comb in step Press Start Place your originals in the feeder press the Shortcut key To 4 where you registered the Different Size OriginalsDifferent Size Originals ModeSet the desired copy modes 24Different Size Originals Customizing Settings Available Settings Applicable Copy Settings TablePress Additional Functions Changing the Current Standard SettingsImage Quality and Copy Exposure EXP press OK Press Reset to return to the Copy Basic Features screenPress F3 or F4 to highlight 01 STD Image Qual Press F3 or F4 to highlight 02 STD Zoom Ratio Press OK Zoom RatioPress F3 or F4 to highlight 03 Standard Copy QTY press OK Copy QuantityWidth press OK Frame Erase WidthPress F3 or F4 to highlight 04 Frame Erase Mm to 20 mm press OK Auto SortPress F2 or F3 + to set the desired frame erase width Press F3 or F4 to select 01 on or 02 OFF Press OK Sort RotatePress F3 or F4 to highlight 05 Auto Sort Press OK Press F3 or F4 to highlight 06 Sort Rotate press OK Original Copy Dull Is Set Dull Is Not Set SharpnessDull SharpPress F3 or F4 to highlight 08 Sharpness press OK If you want to use the prescan function, select 01 on PrescanPress F3 or F4 to highlight 09 Prescan press F4OK 14Changing the Current Standard Settings Assigning Functions Using Shortcut KeysPress F3 or F4 to select a shortcut key press OK Press F3 or F4 to highlight 07 Shortcut KEY SET press OKMaking Copies That contains the copy mode you want to setIf necessary, specify the settings for each mode Setting Applicable18Using Shortcut Keys Appendix Function to Be Set Combination of Functions ChartCombination available Combination unavailable 4Combination of Functions Chart Originals Size Different Numerics IndexIndex Making Copies Canon Italia S.p.A Canon Deutschland GmbH

Related manuals

Manual 382 pages 14.98 Kb