Canon 2010F manual If you have set Department ID Management, press ID

Start

ID

●If you want to reserve a copy job and scan an original while the machine is printing:

❑Place your original ➞ press [Start].

For instructions on reserving a copy job, see “Reserved Copying,” on p. 1-18.

8 When scanning is complete, remove your original.

9 If the optional Card Reader-E1 is attached, remove the control card.

For instructions on using the optional Card Reader-E1, see Chapter 3, “Optional Equipment,” in the Reference Guide.

10 If you have set Department ID Management, press [ID].

For instructions on using Department ID Management, see Chapter 6, “System Manager Settings,” in the Reference Guide.

1

Introduction to Copying

Flow of Copy Operations 1-9