Canon 2010F Set the desired copy modes on the Special Features screen, Enter the copy quantity

Page 16

Special Features

Start

4 Set the desired copy modes on the Special Features screen.

Press [Special Features].

1

Press the function keys under the modes that appear on the LCD display, and

Copying

 

which correspond to the copy modes you want to set.

 

NOTE

to

On the Special Features screen, you can select the following copy modes:

Introduction

Two-Page Separation, Margin, Frame Erase, and Image Combination.

 

For instructions on setting each copy mode from the Special Features screen, see

 

Chapter 3, “Special Copying Features.”

 

5 Enter the copy quantity.

For instructions on setting the number of copies, see “Specifying the Required Number of Copies,” on p. 2-2.

6 Press [Start].

If the following screen is displayed, follow the instructions that appear on the LCD

display press (Start) once for each original. When scanning is complete,

press (OK).

Copying starts.

IMPORTANT

While copying, you cannot change copy mode settings, such as the copy quantity, paper size, and copy ratio.

Flow of Copy Operations

1-7

Image 16
Contents Copying Guide ImageRUNNER 2010F Copying Guide Manuals for the Machine How This Manual Is Organized AppendixContents Customizing Settings Special Copying FeaturesAppendix Symbols Used in This Manual How to Use This ManualKeys Used in This Manual Illustrations Used in This Manual ViiLegal Notices TrademarksCopyright DisclaimersIntroduction to Copying Special Features Screen Copy Basic Features ScreenOverview of the imageRUNNER 2010F Additional Functions Menu Flow of Copy Operations Press CopyIf the message Enter Department ID and Password appears If the message Insert a Control Card appearsSet the desired copy mode on the Copy Basic Features screen Place your originalEnter the copy quantity Set the desired copy modes on the Special Features screenPress Start If you want to stop a copy job If you want to cancel a copy job in the standby modeIf you want to interrupt a copy job If you have set Department ID Management, press ID Platen Glass Placing OriginalsFeeder Vertical Placement Horizontal Placement Feeder Vertical PlacementOrientation Platen GlassLift up the feeder Platen GlassPlace your original face down Gently lower the feeder Feeder ADF-J1 Adjust the slide guides to fit the size of your originals Original Output TrayCanceling a Copy Job Using the Stop KeyPress Stop If only one copy job is being processedUsing the System Monitor Screen You cannot select multiple jobs and cancel them all at oncePress Monitor Press F3 YESReserved Copying Reserving Copy Jobs While PrintingPlace your original, and set the desired copy modes Copy lightsWhen scanning is complete, remove the original from Machine Interrupt Mode Press InterruptOnce the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Specifying the Required Number of Copies Copy QuantityChanging the Copy Quantity Copy Quantity Paper Selection Automatic Paper SelectionManual Paper Selection Make sure that Auto Paper is selected press OKPress F3 or F4 to select the desired paper size If you want to use the stack bypassPress OK Text Mode Text/Photo Mode Copy Exposure ManualImage Quality Manual Copy Exposure and Image Quality AutomaticCopy Exposure Manual Press F1 Light or F3 Dark to adjust the exposurePress Light or Text Mode Text/Photo ModePhoto Mode Image Quality ManualCopy Exposure and Image Quality Automatic To cancel the automatic exposure control, press Press F2 Auto Exposur OKPreset Zoom Changing the Copy Zoom RatioZoom by Percentage Auto ZoomReduce Preset ZoomEnlarge Press F3 Reduce or F4 Enlarge to select a preset Zoom by PercentageReduction or enlargement ratio press OK Each time you pressSet the copy ratio using the numeric keys press OK 200%. Enter a value within the setting rangeAuto Zoom Correct valuePress F1 Copy Ratio Press F2 Auto Zoom OKCollating Copies Optional Units Collate Rotate Offset Staple*1If the Rotate Mode Is Set If the Collate Mode Is SetOriginals Set Result If the Offset Mode Is Set If the Staple Mode Is SetOrder Collate Place your originals press CollateIf you want to set the Rotate mode If you want to set the Offset modeOrder Staple AppearsLights Number of Copies, on pPress Start 24Collating Copies Special Copying Features Two-Page Separation FeaturesPlace your original on the platen glass press Special Direction that the book opens press OK Original Size setting menu appearsSpecial Press F4 Orignal Size to select the paper size press OK Margin Mode Place your original press Special FeaturesOriginal Left Margin Selected Right Margin Top Margin Bottom Margin Selected Selected6Margin Mode Press YES or Frame Erase Original Frame EraseBook Frame Erase Mode Original Selected Copy Not Selected Original Frame EraseBook Frame Erase Hole Punch ErasePress F4 Orignal Size to select the size of the original Book Frame Erase Press F3 Frame Erase Press F3 Book FR ERS OK Opened press OKDefault setting is ‘10 mm’ Press F3 or F4 + to set the desired book frame eraseWidth 3 mm to 50 mm for the center line press OK Clear to clear the valueHole Punch Erase Press F3 Frame Erase Press F4 HOLE/P Erase OKEach time you press 16Frame Erase Original Vertical Placement Copy Image CombinationPlace your originals press Special Features Copying SpecialBecomes highlighted Copy Layout setting menu appears If you selected 2 on 1 Comb in step Paper size press OKIf you selected 4 on 1 in step Press Start To 4 where you registered the Different Size Originals Different Size OriginalsMode Place your originals in the feeder press the Shortcut keySet the desired copy modes 24Different Size Originals Customizing Settings Copy Settings Table Available Settings ApplicableImage Quality and Copy Exposure Changing the Current Standard SettingsPress Additional Functions Press F3 or F4 to highlight 01 STD Image Qual Press Reset to return to the Copy Basic Features screenEXP press OK Zoom Ratio Press F3 or F4 to highlight 02 STD Zoom Ratio Press OKCopy Quantity Press F3 or F4 to highlight 03 Standard Copy QTY press OKPress F3 or F4 to highlight 04 Frame Erase Frame Erase WidthWidth press OK Press F2 or F3 + to set the desired frame erase width Auto SortMm to 20 mm press OK Press F3 or F4 to highlight 05 Auto Sort Press OK Sort RotatePress F3 or F4 to select 01 on or 02 OFF Press OK Press F3 or F4 to highlight 06 Sort Rotate press OK Sharpness DullSharp Original Copy Dull Is Set Dull Is Not SetPress F3 or F4 to highlight 08 Sharpness press OK Press F3 or F4 to highlight 09 Prescan press F4OK PrescanIf you want to use the prescan function, select 01 on 14Changing the Current Standard Settings Using Shortcut Keys Assigning FunctionsPress F3 or F4 to highlight 07 Shortcut KEY SET press OK Press F3 or F4 to select a shortcut key press OKThat contains the copy mode you want to set If necessary, specify the settings for each modeSetting Applicable Making Copies18Using Shortcut Keys Appendix Combination of Functions Chart Function to Be SetCombination available Combination unavailable 4Combination of Functions Chart Originals Size Different Index NumericsIndex Making Copies Canon Deutschland GmbH Canon Italia S.p.A
Related manuals
Manual 382 pages 14.98 Kb