Canon 2010F manual Manual Paper Selection, Make sure that Auto Paper is selected press OK

Page 36

COPY

1

Press [COPY].

 

 

COPY lights.

F2

2

Place your original press [F2] (PAPER SELECT).

 

OK

3 Make sure that <AUTO PAPER> is selected press [OK].

The selected mode is set, and the display returns to the Copy Basic Features screen.

Start

4 Press [Start].

Copying starts.

NOTE

If the message <LOAD THE APPROPRIATE SIZE PAPER> appears, the paper loaded in the paper drawers is different from the original paper size. Load the

appropriate paper. If you press (Start) without loading the correct paper size, the machine automatically selects the smallest loaded paper size, and starts copying.

Manual Paper Selection

You can make copies after manually selecting the paper size and type of paper loaded in the paper drawers or stack bypass.

IMPORTANT

If paper is selected manually, you cannot use the Rotate print mode even if ROTATE PRINT is set to ‘02 ON’ in the Common Settings menu. (See Chapter 4, “Selecting and Storing Settings,” in the Reference Guide.)

NOTE

The paper sizes/types loaded in the paper drawers can be set from the Additional Functions menu. (See Chapter 4, “Selecting and Storing Settings,” in the Reference Guide.)

2

Basic Copying Features

Paper Selection

2-5

Image 36
Contents Copying Guide ImageRUNNER 2010F Copying Guide Manuals for the Machine How This Manual Is Organized AppendixContents Special Copying Features Customizing SettingsAppendix How to Use This Manual Symbols Used in This ManualKeys Used in This Manual Illustrations Used in This Manual ViiLegal Notices TrademarksCopyright DisclaimersIntroduction to Copying Copy Basic Features Screen Special Features ScreenOverview of the imageRUNNER 2010F Additional Functions Menu Flow of Copy Operations Press CopyIf the message Enter Department ID and Password appears If the message Insert a Control Card appearsSet the desired copy mode on the Copy Basic Features screen Place your originalSet the desired copy modes on the Special Features screen Enter the copy quantityPress Start If you want to cancel a copy job in the standby mode If you want to stop a copy jobIf you want to interrupt a copy job If you have set Department ID Management, press ID Placing Originals Platen GlassFeeder Vertical Placement Horizontal Placement Feeder Vertical PlacementOrientation Platen GlassPlaten Glass Lift up the feederPlace your original face down Gently lower the feeder Feeder ADF-J1 Adjust the slide guides to fit the size of your originals Original Output TrayCanceling a Copy Job Using the Stop KeyPress Stop If only one copy job is being processedUsing the System Monitor Screen You cannot select multiple jobs and cancel them all at oncePress Monitor Press F3 YESReserved Copying Reserving Copy Jobs While PrintingPlace your original, and set the desired copy modes Copy lightsWhen scanning is complete, remove the original from Machine Interrupt Mode Press InterruptOnce the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Copy Quantity Specifying the Required Number of CopiesChanging the Copy Quantity Copy Quantity Paper Selection Automatic Paper SelectionManual Paper Selection Make sure that Auto Paper is selected press OKPress F3 or F4 to select the desired paper size If you want to use the stack bypassPress OK Text Mode Text/Photo Mode Copy Exposure ManualImage Quality Manual Copy Exposure and Image Quality AutomaticPress F1 Light or F3 Dark to adjust the exposure Copy Exposure ManualPress Light or Text Mode Text/Photo ModePhoto Mode Image Quality ManualCopy Exposure and Image Quality Automatic To cancel the automatic exposure control, press Press F2 Auto Exposur OKPreset Zoom Changing the Copy Zoom RatioZoom by Percentage Auto ZoomPreset Zoom ReduceEnlarge Press F3 Reduce or F4 Enlarge to select a preset Zoom by PercentageReduction or enlargement ratio press OK Each time you pressSet the copy ratio using the numeric keys press OK 200%. Enter a value within the setting rangeAuto Zoom Correct valuePress F1 Copy Ratio Press F2 Auto Zoom OKCollating Copies Optional Units Collate Rotate Offset Staple*1If the Collate Mode Is Set If the Rotate Mode Is SetOriginals Set Result If the Offset Mode Is Set If the Staple Mode Is SetOrder Collate Place your originals press CollateIf you want to set the Rotate mode If you want to set the Offset modeOrder Staple AppearsLights Number of Copies, on pPress Start 24Collating Copies Special Copying Features Features Two-Page SeparationPlace your original on the platen glass press Special Original Size setting menu appears Direction that the book opens press OKSpecial Press F4 Orignal Size to select the paper size press OK Margin Mode Place your original press Special FeaturesOriginal Left Margin Selected Right Margin Top Margin Bottom Margin Selected Selected6Margin Mode Press YES or Frame Erase Original Frame EraseBook Frame Erase Mode Original Selected Copy Not Selected Original Frame EraseBook Frame Erase Hole Punch ErasePress F4 Orignal Size to select the size of the original Book Frame Erase Press F3 Frame Erase Press F3 Book FR ERS OK Opened press OKDefault setting is ‘10 mm’ Press F3 or F4 + to set the desired book frame eraseWidth 3 mm to 50 mm for the center line press OK Clear to clear the valueHole Punch Erase Press F3 Frame Erase Press F4 HOLE/P Erase OKEach time you press 16Frame Erase Original Vertical Placement Copy Image CombinationPlace your originals press Special Features Copying SpecialBecomes highlighted Copy Layout setting menu appears Paper size press OK If you selected 2 on 1 Comb in stepIf you selected 4 on 1 in step Press Start To 4 where you registered the Different Size Originals Different Size OriginalsMode Place your originals in the feeder press the Shortcut keySet the desired copy modes 24Different Size Originals Customizing Settings Copy Settings Table Available Settings ApplicableChanging the Current Standard Settings Image Quality and Copy ExposurePress Additional Functions Press Reset to return to the Copy Basic Features screen Press F3 or F4 to highlight 01 STD Image QualEXP press OK Zoom Ratio Press F3 or F4 to highlight 02 STD Zoom Ratio Press OKCopy Quantity Press F3 or F4 to highlight 03 Standard Copy QTY press OKFrame Erase Width Press F3 or F4 to highlight 04 Frame EraseWidth press OK Auto Sort Press F2 or F3 + to set the desired frame erase widthMm to 20 mm press OK Sort Rotate Press F3 or F4 to highlight 05 Auto Sort Press OKPress F3 or F4 to select 01 on or 02 OFF Press OK Press F3 or F4 to highlight 06 Sort Rotate press OK Sharpness DullSharp Original Copy Dull Is Set Dull Is Not SetPress F3 or F4 to highlight 08 Sharpness press OK Prescan Press F3 or F4 to highlight 09 Prescan press F4OKIf you want to use the prescan function, select 01 on 14Changing the Current Standard Settings Using Shortcut Keys Assigning FunctionsPress F3 or F4 to highlight 07 Shortcut KEY SET press OK Press F3 or F4 to select a shortcut key press OKThat contains the copy mode you want to set If necessary, specify the settings for each modeSetting Applicable Making Copies18Using Shortcut Keys Appendix Combination of Functions Chart Function to Be SetCombination available Combination unavailable 4Combination of Functions Chart Originals Size Different Index NumericsIndex Making Copies Canon Deutschland GmbH Canon Italia S.p.A
Related manuals
Manual 382 pages 14.98 Kb